摩托車載具的設計必須考慮到摩托車不僅在停車時,而且在行駛時傳遞給載具的載荷。
如果在操作過程中出現問題,可能會導致負載脫落,造成嚴重事故。
為此,耐力公司通過發動機振動、跌落沖擊等方式進行應力測量,這也是汽車制造商所要做的,通過多方面的強度測試,確保高質量的強度水平。
我們致力於制造 "堅固可靠 "的產品。
選擇可靠的產品,按照規定的裝載量等。讓我們享受安全的摩托車生活。
載體和盒子都包含在超值套裝中,是旅行的理想選擇。
盒內配有耐力架專用安裝底座`螺栓螺母`支架`和橡膠,便於安裝和安全固定。
箱體內側裝有固定行李的皮帶,減少了行李在運輸過程中的晃動。
防刮防銹塗層
這是一種由電泳塗層和粉末塗層組成的雙層塗層體系,也用於摩托車車架等產品的防刮防銹。
多個頂箱可以安裝在不同的箱體上,比如givi箱和k-max`shad,這些都是旅行中必不可少的。(通過萬能盒/底座內含的波紋板固定在支架上)
- 頭盔支架可安裝在盒/底座上
兩側有頭盔支架的安裝孔,如有需要可單獨加裝黑色的萬能頭盔支架套裝(eh507hanb1)。也可附。
頭盔支架可以在連接頂箱的同時使用,當頂箱滿了,你不想把頭盔落下時,這很有用。
●可選φ7mm孔
利用載具後方φ7mm的安裝孔,安裝Drorecco後置攝像頭或使用m6螺栓安裝商用鉤栓或眼栓來安裝頭盔支架,可以讓您自行制定規格。可以根據您的需求,對載體進行定制。從尾燈的中心位置,在水平面上方15度和下方15度的所有位置都可以看穿。符合要求(*部分摘錄)。
他們的設計是為了提供最佳的造型,當載體安裝在車身時,同時保持後方的可視性。
●Reasured strength
Motorcycle carriers cannot ensure safety unless they are designed to take into account the impact and other loads transmitted from the motorcycle to the carrier not only when the motorcycle is stationary but also when it is in motion.
If a problem occurs during driving, it may lead to a serious accident due to a fall of the load.
For this reason, Endurance conducts stress measurements by engine vibration and drop impact, which are also conducted by vehicle manufacturers, and ensures a high quality strength level through multifaceted strength tests.
ENDURANCE is trying to make products with "quality and robustness".
Choose a reliable product and follow the specified loading capacity, and enjoy a safe and secure motorcycle life.
●This set includes a carrier and a box which are indispensable for touring!
The box is supplied with a special mounting base, bolts, nuts, brackets and rubber for the ENDURANCE carrier, so it can be mounted easily and safely.
There is a belt inside the box to fix the luggage, so it can reduce the shaking of the luggage while riding.
●Scratch and rust resistant coating
It is finished with two layers of electrodeposition coating and powder coating, which are used for motorcycle frames and are resistant to scratches and rust.
●Compatible with a variety of boxes
Various top case can be installed such as GIVI BOX, K-MAX, SHAD, etc. which is essential for touring.(Fixed to the carrier with the corrugated plate supplied with the universal box / base)
●Helmet holder can be attached
There are mounting holes for helmet holders on both sides, and a universal helmet holder set black (EH507HANB1) can be installed separately on both sides if necessary.
You can use the helmet holder with the top case attached, so it is useful to keep your helmet in the top case when it is full. *See image
●Φ7 option hole
By using the mounting holes for the Φ7 and helmet holder at the rear of the carrier, you can customize the carrier to your own specifications by attaching a rear camera for the DR-Recorder, commercially available hook bolts using M6 bolts or eyebolts. *See image
●Compliance with safety standards for lights
*with Some excerpts) Compatible
It is designed for optimum styling when the carrier is mounted on the vehicle body, while ensuring visibility from the rear.