功能美感的極致
GaleSpeed的主缸,剛性和性能都很強。
"精心 "的意思是 "精心 "或 "精心",將鍛造的鋁材切割到極致,達到不浪費的功能美。
■鍛壓加工的鋁體
在本廠進行鍛壓毛坯的全三維加工。
它們比現有的機身更加緊湊。
金銷是標准配置
鈦塗層金銷是轉軸上的標准配置。
開槽夾,夾持力更強
開槽夾,夾持力更強。
此外,它的兩點用高強度鈦合金法蘭螺栓緊固,在杠桿輸入時傳遞力,不浪費。
徑向安裝
徑向安裝
杠桿垂直推動活塞,不像水平推力泵是水平推動,提供直接而微妙的控制。
作為標准配置的電源桿
有兩種類型的電源桿可供選擇作為標准配置。
它們適合騎手的手感,並提供 "自然的感覺"。
※離合面僅為直線。
可折疊的杠桿
杠桿部分可折疊,以減少翻倒時對主機體的損傷。
可變比杠桿
杠桿的支點到作用點可以0.25mm的增量(最大2mm)來改變杠桿的觸感。
當比值向a方向增大時,沖程量小而硬,當比值向b方向減小時,沖程長而軟。
※圖片為φ19×18-16mm。表中的數值是相等的。
圓形杠桿
一個圓形的杠桿,可以用手指拉動。
【vre系列】
【vre系列】
采用鍛造鋁坯,全三維加工而成的豪華全規格主缸。
杠桿觸感可以根據騎手的喜好進行調整,為騎手提供理想的剎車手感。
Functional beauty at its finest
The ultimate master cylinder that pursues rigidity and performance with GALE SPEED's cutting technology.
As the name "Elaborate" means "elaborately made" or "skillful", the forged aluminum material is machined to the utmost limit to realize the functional beauty without waste.
■Machined aluminum unit
Full 3D machining of forged blanks is done at the GALE SPEED factory.
It is more compact than the existing body.
■Gold pin comes as standard equipment
The pivot is equipped with a titanium-coated gold pin as standard.
■Clamps that keep the force in place
Slots are made on the inside of the clamp to improve the clamping force.
In addition, the lever is fastened at two points with high strength titanium flange bolts to transmit the force at the time of lever input without waste.
■Radial mount
Unlike thrust pumps, which are pushed horizontally, the lever pushes the piston vertically, providing direct and delicate control.
■Power lever comes as standard equipment
A power lever with two different lengths comes as standard equipment
It fits the rider's hand and provides a natural operating feel.
*Clutch side is straight only.
■Foldable lever
Designed in a way that the lever tip collapses in the event of a fall which reduces the impact on the master unit.
■Variable ratio lever
The lever touch can be changed by adjusting the fulcrum and action point of the lever in 0.25mm increments (maximum 2mm).
If the ratio is increased in the A direction, the stroke amount will be smaller and the touch will be harder, and if the ratio is decreased in the B direction, the stroke will be longer and the touch will be softer.
*The figure in the image is for Φ19 x 18-16mm.The figures in the table are equivalent.
■Round Lever
The lever has a round shape that can be pulled by sliding it with your finger.
[VRE Series]
Luxurious full-spec master cylinder machined from forged aluminum blanks by full three-dimensional machining.
You can adjust the lever touch to your liking to achieve the ideal brake feeling you want.