【閥門應用】
.大燈
【發光顏色】
。白色
【閥門形狀】
.h4 hi/lo偏扇型
【閥門類型】
.led
【規格】
.額定電壓(v):dc12v
。功耗(w):30w
。色溫:6000w
。車輛檢驗合格
。附檢驗協會成績單
。制造商的保修期:1年
。日本制造
產品的規格可能會被制造商改變。請注意,我們沒有任何這方面的信息。
雖然本產品通過汽車檢測,但如果大燈透鏡表面因光軸老化而臟污或混濁,或大燈內的反光鏡與正品大燈單元以外的外置大燈單元連接,則有可能不合格。請注意,這不是一份詳盡的清單。
*Protec的兼容性驗證表明,它與雅馬哈sr400和鈴木玻璃卡車司機等車輛兼容,這些車輛的前燈箱較窄,尾部像炮彈一樣呈錐形。
*根據說明書正確安裝設備。不正確的安裝將導致火災。它可能會導致故障。
*在安裝前,請務必取下電池負極側的端子線,並確保鑰匙處於關閉狀態。
*請勿觸摸或沾染LED芯片。污垢的附着可能會導致LED芯片因發熱而燒毀。
*本產品為精密儀器,請小心操作。不要摔倒或強行拉線。操作不當可能會造成故障、受傷或燒傷,並可能導致危及生命的事故。此外,要小心,因為火花和有缺陷的絕緣材料會引起故障和車輛火災。
*拆解本產品。不要對數據進行任何修改。分解:我們對改裝後的產品不提供任何保證。
*當大燈開啟時,請勿直視大燈發出的LED燈。它可能會導致視覺障礙。
*請勿將水灑在鏡頭上,當鏡頭開啟時,請勿將水灑在鏡頭上,當鏡頭關閉時,請勿將水灑在鏡頭上。溫度的突然變化可能會導致透鏡或LED燈泡的損壞。由於溫度過高,請勿觸摸閥門後部的散熱片和控制器單元。
*本產品設計為12V直流(dc)減去共線。接線時一定要用dc12v電源。
*本產品與小排量車常用的交流(ac)照明型大燈不兼容。
【關於與車輛檢查的兼容性說明】
※本產品是作為車輛檢查的符合品銷售的,但這是關於最大發光強度和色溫。產品安裝後,請務必使用與 "led"(新光源)兼容的檢查機調整光軸。
*對於因光軸調整失誤或透鏡隨時間的推移而變質,或因燈光中的反光鏡的使用而造成的燈光透鏡的維護缺陷,普羅泰克不承擔任何責任。
*經普泰克公司檢查兼容性的車都是正常車。
※如果車輛配備了非正品的售後零件,可能會出現問題。如果您有任何疑問,請隨時與我們聯系。
*如果是兩燈摩托車,則需要在兩側安裝兩套。(兼容2燈套件【65005等】的車輛除外)
*安裝時請務必確認摩托車維修手冊中的相關接線。
[Bulb usage]
・Headlights
[luminous color]
・White
[Bulb shape]
・H4 Hi / Lo Offset Fan Type
[Bulb type]
・LED
[Specification]
・Rated voltage (V): DC12V
・Power consumption (W): 30W
・Color temperature: 6000 Kelvin
・With inspection certificate
one year
・Made in Japan
*There may be changes in product specifications due to the manufacturer's reasons.
*The headlight case of YAMAHA SR400 and SUZUKI GRASS TRACKER is narrow and the rear part is tapered like a cannon ball.
*Install the product correctly according to the instruction manual.Improper installation may result in fire or equipment damage.
*Before installation, be sure to disconnect the terminal cord on the minus side of the battery and confirm that the key is OFF.
*Please do not touch or get the LED chip dirty.Dirt can cause the LED chip to burn due to heat being built-up.
*Please handle this product with care as it is a precision instrument.Do not drop the product or pull the wires forcibly.Improper handling may cause malfunction, injury, burns, or serious accidents that may result in death.In addition, sparks, poor insulation, or short-circuiting may cause a failure of the product or a fire in the vehicle.
*Do not disassemble or modify this product in any way.Products that have been disassembled or modified are not covered by warranty.
*Do not look directly at the LED light when it is on.It can cause visual impairment.
*Do not splash water on the lens while the light is on or immediately after it is turned off.Sudden temperature change may cause damage to the lens or LED bulb.In addition, please do not touch the LED bulb itself, the heat sink behind it, and the controller unit because they get to the high temperature.
*This product is only for 12v DC minus common.Be sure to use DC12V as the power source for wiring.
*Please do not connect to the AC headlight, which is common in small displacement vehicles.
After installing the product, be sure to adjust the optical axis using an inspection machine that is compatible with LED (new light source).
*Protec is not responsible for any dirt or clouding of the light lens, scratches, peeling of the reflector plating inside the light due to the use of non-stock headlights, or poor maintenance due to poor optical axis adjustment or aging.
*All vehicles that have been tested by Protec are stock.
*If your vehicle has aftermarket parts other than stock parts, there may be a problem.If you have any questions, please feel free to contact PROTEC.
*In the case of a 2-light motorcycle, 2 sets are required for installation on both sides.(2-Light Kit [Part Number: Except for vehicles that conform with [65005, etc.])
*Please refer to the service manual of your motorcycle to confirm the respective wiring before installation.