【維修零件】排氣管尾段支架
Product # P-X257
Product # P-X257
※此商品為歐洲供應商直接採購、進口。因此若訂單成立,本站恕不接受取消該訂購。
※若您於商品訂購前,有任何問題;舉凡商品內容、規格、交期等,請透過商品諮詢進行確認。
【訂購前注意】 訂購前請詳加確認欲購買的顏色、尺寸等等資訊。 商品多為下訂後回覆交期,所以可能有商品停產,或需長時間等待商品出貨之狀況。 訂單若因廠商缺貨與暫時無法交貨等因素,則不會成立;訂單沒有成立則不會收取任何費用。 商品自訂購至出貨須經過多道運送流程,因此有可能產生包裝在運送過程中變形、破損,但商品本體完好、可正常使用之情況。 商品可能發生製造商變更規格、外觀設計,導致包裝或本體造型與商品頁面圖片不同之情況。 若因製造商變更產品設計、規格,導致商品無法發揮訂購時預期之功能,還請您與本站客服諮詢後續處理。 【退貨注意】 若您需要商品退貨的服務,還請您至退貨區塊進行申請;並請您保持商品外觀、用原包裝外箱封裝完好。 在收到您的退貨申請時,我們會盡快派物流業者前去收貨。 【正品保證】 正品保證之商品,若有被查獲疑似為仿冒品,並經過相關訴訟,最後交由法院判決如實者,將會對購買此商品的顧客進行當初購買價格的10倍賠償。Model Page Links
Fits: HONDA CBR1000RR-R SP 20-23, HONDA CBR1000RR-R 20-23
[How is it used?
The OEM Tandem Footpeg is removed and installed.
Was the one you received as per Image?
It's a simple Aluminum Bracket and it looks exactly like the Image.
Was the installation difficult?
It's very easy.
Just remove a total of 3 Bolts from the body side and the Silencer side.
It takes less than 10 minutes to replace.
How was your experience with it?
The OEM Silencer is also AKRAPOVIC, so I think it's Exactly the right product.
If you remove the Tandem Footpeg of Both Sides and replace it with this product, it will look quite Race ish.
It is a little bit lighter.
The Tandem Footpeg will be gone, so you will not be able to ride with two people.
[Included Parts:were they on?
All the necessary parts for replacement are included and even the screw lock agent is included.
[Was there anything that disappointed you?
Not disappointing, but a little pricey for what it is.View Detail
Fits: HONDA CBR1000RR-R SP 20-23, HONDA CBR1000RR-R 20-23
This is the product of AXIS La! The OEM Exhaust System and the Parenthesis are perfect, but the price is too high … but it is one of the products that can satisfy the owner's feeling! 。 The installation does not require any special tools as it is just a replacement for the OEM Passenger FootpegBracket, but it does require a tool (star shaped) to tighten the bolt that stops the exhaust system, so you will need to check your tools before purchasing.
The Torque for the bracket is 27Nm, which is a very high Torque value, so make sure you put some effort into it. Just be careful not to lick the bolt, and make sure the tool is tight. If you are not sure, after tightening the bolt, you may want to use a mackie or marker to mark the bolt and clasp vertically to make sure the bolt is not loose. I hope it will be helpful for you.View Detail
Fits: HONDA CBR1000RR-R SP 20-23, HONDA CBR1000RR-R 20-23
Perfect compatibility with the OEM AXIS La Exhaust System! I was able to install it without any trouble. …But you need Torx wrench because the Bolt is Torque (star shape), so you need to be careful.View Detail
Fits: HONDA CBR1000RR-R SP 20-23, HONDA CBR1000RR-R 20-23
Exactly fits the AXIS Lab Bitch in NORMAL. Other company's products are expensive or the design is not so good.
It fits without a problem because it is the same manufacturer.View Detail
Fits: HONDA CBR1000RR-R SP 20-23, HONDA CBR1000RR-R 20-23
The OEM Exhaust System for the CBR 1000RR-R is also AXIS La, so the Exhaust Bracket also has AXIS La logo on it, and it looks and feels very solid, and I like it a lot!View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
通知
在您加入購物車前請選擇選項。
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.