*有一種情況是廠家為了方便,對商品進行了規格變更。請確認。
【關於安裝】
*軸是重要部件。
安裝工作應該由專業店的合格人員來完成。
軸軸的安裝必須由合格的技術人員完成。
軸軸的安裝必須由專業店有資質的人員進行。
請根據軸的頭部形狀使用合適的工具,否則會劃傷軸表面的鍍膜,發生銹蝕。
。
安裝前請在軸表面噴上潤滑脂或其他油類。
軸的表面經過`kood獨創的3層電鍍膜處理,所以在正常使用的情況下,軸本身不會出現銹蝕。
這是為了防止因金屬潛在的差異而造成的輪轂軸承等的銹蝕遷移。
。擰緊力矩應符合制造商的規定值。
。
如果使用正品螺母安裝,請檢查螺母。
如果螺母被摔壞或自鎖部分磨損,一定要使用新的螺母。這是為了防止損壞軸的螺紋部分。
【關於產品質量】
.
【產品質量】
產品的生產和管理是在最好的條件下進行的。
【產品質量】
產品的生產和管理都是非常用心的,但如果有任何問題,請在工作前聯系我們。
*我公司在任何情況下都不接受安裝後的索賠或退貨(如將軸穿過車輪)。
。
kood軸上有3層鍍層。
三層鍍膜貼在軸上。
該軸采用3層電鍍工藝。
生銹的主要原因
。
遷移生銹。 外面的鐵銹會沾到鍍層表面
。電鍍膜損壞... 工具使用不當。本產品不在質量保修范圍內。
請事先了解。
[Material] Chromoly steel (3-layer plating finish)
Without plating nut
*There may be changes in product specifications due to the manufacturer's reasons.
*Even if the vehicle is compatible, it will not fit if the front forks are not stock or if the vehicle has been customized.
[About the installation]
*Axle shafts are critical parts.
Installation must be carried out by qualified personnel at a professional shop.
・Please use the appropriate tool for the head shape of the shaft.
If the shaft is tightened with an inappropriate tool, the plating film on the shaft surface will be scratched and rust will be caused.
・Before installation, apply grease or other oil to the shaft surface.
The surface of the shaft is treated with KOOD's original "3-layer plating film", so rust will not occur on the shaft itself under normal use.The purpose is to prevent rust transfer from wheel bearings, etc., which is caused by the potential difference of metals.
・Please observe the tightening torque specified by the manufacturer.
・If the vehicle is installed using the stock nut, please check the nut.
If the nut is damaged by tipping over, etc., or if the self-locking part is worn out, be sure to use a new nut.This is to prevent damage to the shaft threads.
[About Product Quality]
・KOOD has taken all possible measures to manage the production. However, if there is any problem, please contact KOOD before the work.
*In no event will KOOD accept any claims or returns after the installation (such as threading the shaft into the wheel).
・About rust
KOOD shafts are treated with a "3-layer plating film".
It is processed with a stronger film than normal plating film.Rust may occur depending on the usage conditions, but there is no problem with the quality.
・Transferred rust: Rust from the outside gets on the plated surface
・Damage to the plating film... Improper use of tools, flying rocks during riding, falls, etc.
[Caution]
In case of KOOD shafts with plated nuts, damaging the threads during installation often happens.
Due to the nature of plating, this is often seen when the plated parts (e.g. KOOD shaft and KOOD nut) mesh with each other or when the threaded part is greaseless.
Please use an anti-corrosive grease such as sledge compound on the screw part when you install it.