*有一種情況是廠家為了方便,對商品進行了規格變更。請確認。由於制作者的方便,商品的規格可能會發生變化,敬請諒解。請確認。
【關於安裝】
*軸是重要部件。
【安裝】
※軸是一個重要的部件,應該由有資質的人員到專業的商店進行安裝。
。請根據軸的頭部形狀使用合適的工具。
請根據軸的頭部形狀使用合適的工具,否則會劃傷軸表面的鍍膜,發生銹蝕。
。
請在安裝前在軸表面噴灑油脂或其他油類。
軸的表面塗有三層電鍍膜,在正常使用的情況下,可以防止軸本身生銹。這是為了防止金屬之間的電勢差引起的輪轂軸承等處的銹蝕遷移。
。請按照制造商規定的擰緊力矩進行操作。
。如果您使用正品螺母安裝產品,請檢查螺母。
如果螺母被摔壞或自鎖部分磨損,一定要使用新的螺母。這是為了防止損壞軸的螺紋部分。
【產品質量】
。
【產品質量】
產品的生產和管理是在最好的條件下進行的。
【產品質量】
產品的生產和管理都是非常用心的,但如果有任何問題,請在工作前與我們聯系。
※在任何情況下,我們都不接受安裝後的任何索賠或退貨(如將軸穿過車輪)。
。
庫德軸采用三層電鍍膜。這也是唯一的方法。
*生銹的主要原因
.遷移銹:外面的鐵銹進入鍍層表面。電鍍膜的損壞:使用錯誤的工具。鍍膜損壞:使用錯誤的工具、行駛過程中的踏腳石、跌落等。
※質量保修期內不包括生銹。本產品的質量不作保證,敬請諒解。
[Material] Chromoly steel (3-layer plating finish)
With plated nut
*There may be changes in product specifications due to the manufacturer's reasons.
*Even if the vehicle is compatible, it will not fit if the front forks are not stock or if the vehicle has been customized.
[About the installation]
*Axle shafts are critical parts.
Installation must be carried out by qualified personnel at a professional shop.
・Please use the appropriate tool for the head shape of the shaft.
If the shaft is tightened with an inappropriate tool, the plating film on the shaft surface will be scratched and rust will be caused.
・Before installation, apply grease or other oil to the shaft surface.
The surface of the shaft is treated with KOOD's original "3-layer plating film", so rust will not occur on the shaft itself under normal use.The purpose is to prevent rust transfer from wheel bearings, etc., which is caused by the potential difference of metals.
・Please observe the tightening torque specified by the manufacturer.
・If the vehicle is installed using the stock nut, please check the nut.
If the nut is damaged by tipping over, etc., or if the self-locking part is worn out, be sure to use a new nut.This is to prevent damage to the shaft threads.
[About Product Quality]
・KOOD has taken all possible measures to manage the production. However, if there is any problem, please contact KOOD before the work.
*In no event will KOOD accept any claims or returns after the installation (such as threading the shaft into the wheel).
・About rust
KOOD shafts are treated with a "3-layer plating film".
It is processed with a stronger film than normal plating film.Rust may occur depending on the usage conditions, but there is no problem with the quality.
・Transferred rust: Rust from the outside gets on the plated surface
・Damage to the plating film... Improper use of tools, flying rocks during riding, falls, etc.
[Caution]
In case of KOOD shafts with plated nuts, damaging the threads during installation often happens.
Due to the nature of plating, this is often seen when the plated parts (e.g. KOOD shaft and KOOD nut) mesh with each other or when the threaded part is greaseless.
Please use an anti-corrosive grease such as sledge compound on the screw part when you install it.