請注意,該產品不適合使用非原裝或定制的前叉的車輛。請提前了解這一點。
請注意,由於制造商的原因,產品規格可能會有變化。請理解。
【關於安裝
軸軸是一個重要的組成部分。
安裝工作只能由專業商店的合格人員進行。
為軸的頭部形狀使用正確的工具。
用不合適的工具擰緊會損壞軸表面的電鍍膜,導致生銹。
安裝前,軸表面必須用油脂或油潤滑。
軸的表面經過kood獨創的 "3層電鍍 "處理,這意味着軸本身在正常使用下不會生銹。這是為了防止由於金屬的電位差而使鐵銹從車輪軸承上移走。
擰緊的扭矩必須符合制造商的規定值。
對於裝有原廠螺母的車輛,請檢查螺母。
如果螺母的自鎖部分有磨損的跡象或因翻倒造成的劃痕,一定要使用新的螺母。這是為了防止損壞軸的螺紋。
關於產品的質量
但是,如果產品有任何問題,請在進行任何工作之前與我們聯系。
在任何情況下,我們都不接受安裝後的任何索賠或退貨(例如,軸穿過輪子)。
關於鐵銹
木頭軸經過 "3層電鍍 "處理。
該塗層比普通電鍍更強。根據使用條件,可能會出現銹蝕,但這不是一個質量問題。
<生銹的主要原因
銹跡轉移。 鍍層表面的外部銹蝕
鍍層的損壞... 不正確使用工具,駕駛過程中的飛石,墜落等。
請注意,銹蝕不在質量保證范圍內。
請注意,這並不是一種保證。
請注意
如果你購買的是帶有電鍍螺母的Kood軸,我們在安裝過程中遇到了一些螺紋被咬住的問題。
由於電鍍過程的性質,當電鍍層相互嚙合時(如kood軸和kood螺母),或當螺紋無油時,往往會出現這種情況。
我們建議在安裝過程中,在螺紋部件上使用防腐蝕的油脂,如雪花膏。
[Material] Chromoly steel (3-layer plating finish)
Without plating nut
*There may be changes in product specifications due to the manufacturer's reasons.
*Even if the vehicle is compatible, it will not fit if the front forks are not stock or if the vehicle has been customized.
[About the installation]
*Axle shafts are critical parts.
Installation must be carried out by qualified personnel at a professional shop.
・Please use the appropriate tool for the head shape of the shaft.
If the shaft is tightened with an inappropriate tool, the plating film on the shaft surface will be scratched and rust will be caused.
・Before installation, apply grease or other oil to the shaft surface.
The surface of the shaft is treated with KOOD's original "3-layer plating film", so rust will not occur on the shaft itself under normal use.The purpose is to prevent rust transfer from wheel bearings, etc., which is caused by the potential difference of metals.
・Please observe the tightening torque specified by the manufacturer.
・If the vehicle is installed using the stock nut, please check the nut.
If the nut is damaged by tipping over, etc., or if the self-locking part is worn out, be sure to use a new nut.This is to prevent damage to the shaft threads.
[About Product Quality]
・KOOD has taken all possible measures to manage the production. However, if there is any problem, please contact KOOD before the work.
*In no event will KOOD accept any claims or returns after the installation (such as threading the shaft into the wheel).
・About rust
KOOD shafts are treated with a "3-layer plating film".
It is processed with a stronger film than normal plating film.Rust may occur depending on the usage conditions, but there is no problem with the quality.
・Transferred rust: Rust from the outside gets on the plated surface
・Damage to the plating film... Improper use of tools, flying rocks during riding, falls, etc.
[Caution]
In case of KOOD shafts with plated nuts, damaging the threads during installation often happens.
Due to the nature of plating, this is often seen when the plated parts (e.g. KOOD shaft and KOOD nut) mesh with each other or when the threaded part is greaseless.
Please use an anti-corrosive grease such as sledge compound on the screw part when you install it.