現在,ETC也是騎着摩托車在高速公路上行駛時的必備物品。
然而,重要的是要記住,它也是挨着盜竊的。
等 如果你離開車輛時把卡留在了歐倍特,而卡被盜和被濫用,你也有義務支付。
我們必須設計出保護自己的方法,不要讓我們的等等卡被盜......'
這就是為什么WorldWalk開發了'可上鎖等箱'。
然而,安裝時需要一點巧思。有了汽車專用的安裝支架,安裝將是小菜一碟!
帶摩托車鎖的等車箱套裝",其中包括 "等車箱和安裝支架",以及 "Dragster 400翼軌安裝套件",其中只包括安裝支架。
■使用了比鋼更輕的鋁。
鋁板經過激光切割,厚度為2毫米,有適當的厚度以確保強度。表面塗有黑色的半光漆,與車身融為一體,防止生銹。
■抗震的墊子墊片。
附有緩沖墊片,以減少駕駛時的嘎嘎聲。支持機箱內的振動吸收。
■包括一個備用的緩沖墊片。
根據安裝位置和其他因素的不同,歐倍青可能會在其他箱子里發出響聲。
包括一個墊子墊片,所以在出現搖晃的情況下,可以用墊子墊片來進行調整。
■專為Mitsuba Sankowa設計的。
OBE是由Mitsuba Sankowa特別設計的。(見兼容的汽車型號)。
箱子的尺寸已經變得非常緊湊,幾乎可以完美地放在箱子里。
■箱子里面的螺栓也很巧妙。
提供了特殊的低頭螺栓,以防止螺栓頭撞到等體。 鑰匙是櫪木屋公司生產的Mylock,該公司為宙斯盾艦、噴氣式飛機和子彈列車等提供零件。為了使外殼盡可能小,它被加工和安裝得比原鑰匙還要小。
■包括用於保護布線的橡膠扣眼。
在箱子的接線點上有橡膠扣眼,以防止接線惡化。
■支架可以安裝在垂直或水平安裝位置。
等 "可以安裝在車把上,但許多人希望盡可能地保持車把周圍的清潔。
因為飲料架和智能手機經常被安裝在長途騎行中,所以涉及到一些尺寸的箱子等,應該盡可能地安裝在對此類其他物品有影響的地方。
使用'等'字形的箱子涉及到一些尺寸,所以它們被設計為安裝在機翼導軌上,在那里它們盡可能的不顯眼。
安裝支架可以在機翼導軌上向上、向下、向左或向右翻轉,因此它可以安裝在任何一個位置。
你可以把它安裝在你喜歡的地方。
ETC is now a must-have item even when riding on the highway on a motorcycle.
However, we must not forget that it is also next to theft.
If you leave the vehicle with the card in the ETC unit and the card is stolen and misused, you are also obligated to pay.
To protect ourselves, we must devise ways to prevent our ETC cards from being stolen.
To meet this need, WORLDWALK developed the "ETC case with key.
However, a little ingenuity is required for installation.With the model-specific mounting brackets, installation will be a breeze!
Two types are available: the "ETC Case Set with Motorcycle Lock, " which includes the ETC case and mounting bracket, and the "Dragster 400 Fender Rail Mount Kit, " which includes the mounting bracket only.
[Product Specification]
■Uses aluminum, which is lighter than steel
Strength is ensured by laser-cutting aluminum plates to a thickness of 2mm to provide adequate thickness.The surface is coated with a black semi-gloss finish to blend in with the vehicle body and resist rust.
■Rattling prevention cushion spacer
Cushion spacers are applied to reduce rattling while riding.Supports vibration absorption in the case.
■ Cushion spacer spare included
Depending on the installation position, the OBE may rattle inside the ETC case.One cushion spacer is included, so in case of rattling, the cushion spacer can be used for adjustment.
■Designed exclusively for Mitsubasankowa
The OBE is specially designed by Mitsuba Sankowa.(See Compatible Models)
The case size has been made extremely compact and fits almost perfectly in the case.
■Bolts inside the case are also devised
A special low-head screw is included to prevent the head of the bolt from hitting the ETC unit.The keys are made by Tochigiya, which supplies parts for Aegis ships, jets, bullet trains To make the ETC case as small as possible, the keys are processed to be even smaller than the original ones and installed.
■ Includes rubber grommets to protect wiring
Rubber grommets are included at wiring points on the case to prevent wiring deterioration.
[The bracket can be installed in either the top, bottom, left or right mounting position]
Although there is a method of mounting the ETC on the steering wheel, many people want to keep the area around the steering wheel as clean as possible.
Since drink holders and smartphones are often mounted for long-distance driving, the ETC case, which comes with some size, should be mounted in a location that does not interfere with such other items as much as possible.Since the use of an ETC case involves some size, it is designed for installation on the fender rail with as little obstruction as possible.
The mounting bracket can be flipped up, down, left or right on the fender rail, so it can be installed in either position.
You can install it at your preferred location.
*On the left side, only upward installation is possible.If the helmet is installed face down, the helmet lock cannot be used.