聚碳酸酯保護器為標准配置。
時尚的護手,標准配置為桿端安裝聚碳酸酯(PC)保護器。
聚碳酸酯(pc),可抗沖擊、抗紫外線、抗低溫和高溫,是一種多功能、簡單和時尚的設計,可用於任何風格的車輛。
它不僅增加了防風效果,而且還具有減輕正面沖擊的功能。
安裝就像固定在車把末端一樣簡單。
雖然不需要傳統護手的復雜性,但它通過高強度的鋁合金桿端塞牢牢地固定在那里,這是由加工制造的。
保護器可以拆除,可以安裝其他設計的ZETA保護器,讓您享受您喜歡的造型。
■通過松開臂部螺栓,可以在桿端軸線上無級地上下調整角度。
■特殊的墊片允許總共九個位置的調整:從中心位置開始的一個5°台階,四個上台階和四個下台階。
很容易適應你喜歡的造型。
■桿端塞上的凹槽可以將手臂位置調整到兩個位置,以適應車輛。
它可以防止車身脫落,還可以作為一個擋板,防止因翻倒而損壞節氣門管。
■護腕是由柔軟而有彈性的pu樹脂制成。
減輕正面沖擊,防止對護衛體的損害。
■通過安裝和拆卸帶有激光打印標志的前板,可以有兩種設計選擇。
■可拆卸的聚碳酸酯保護器是標准配置。
■允許連接Zeta xc保護器系列。可以享受到多種多樣的造型選擇。
【可附加保護器】。
zeta x3 protector', zeta x3 protector
zeta x2 protector', zeta x2 protector
zeta xc protector', zeta xc protector
zeta xc-pro protector', zeta xc-pro protector.
【如何選擇聲波護手】。
<通用型 zs72-2000/ze72-2100
可以安裝在桿端塞子被拆除和空心的車輛上。
●本田汽車
如果安裝區域存在半月形階梯狀的內重物,如果內重物被移除並中空,就可以安裝。
●suzuki車輛
如果有的話,可以把內部的砝碼拆下來,如果是空心的,可以安裝。
<m16/m8型 zs72-2001/zs72-2101>'
取下車把端塞,檢查車把端區域。
●雅馬哈汽車
可以安裝在車把末端加工有1.5毫米間距的m16的車把上。
●川崎車輛
可安裝在車把上,用m8螺母焊接在車把末端。
Polycarbonate protectors are standard.
Stylish handguard with bar-end-mounted handguard polycarbonate (PC) protector as standard equipment.
Polycarbonate (PC), which is resistant to impact, UV rays, low and high temperatures, has a versatile, simple and stylish design that can be used in any style of bike.
Not only does it increase wind resistance, it also has the function of mitigating impact from the front.
Installation is as simple as fixing it to the handlebar end.
While not requiring the complexity of a conventional handguard, it is firmly secured with a high-strength aluminum alloy bar-end plug made by machining.
The protector can be removed for use, or a ZETA protector of another design can be attached, allowing the user to enjoy their preferred styling.
■By loosening the arm bolts, the angle can be adjusted steplessly up and down on the axis of the bar end.
■The dedicated spacer allows position adjustment from the center position by 5 degrees per level, 4 levels up and 4 levels down, for a total of 9 levels.
Easily adapted to your preferred styling.
■The groove in the bar end plug allows the arm position to be adjusted to two positions.
It prevents the body from falling off and also functions as a stopper to prevent damage to the throttle tube due to tipping.
■Knuckle guards are made of soft and supple PU resin.
Mitigates impact from the front and prevents damage to the guard body.
■Two design options are available by attaching and detaching the front plate with laser-printed logo mark.
■Removable polycarbonate protectors are standard.
■ZETA XC Protector series can be attached.A wide range of styling can be enjoyed.
[Protector can be installed]
・ZETA X3 Protector
・ZETA X2 Protector
・ZETA XC Protector
・ZETA XC-PRO Protector
[How to choose a sonic handguard]
Universal type ZS72-2000 / ZE72-2100
It can be installed on bikes with bar end plugs removed and hollowed out.
●HONDA Bikes
If the mounting section has a half-moon stepped inner weight, it can be mounted if the inner weight is removed and the section is hollow.
●SUZUKI Bikes
Inner weights can be removed if present and attached if hollow.
M16 / M8 type ZS72-2001 / ZS72-2101
Remove the bar end plugs and check the handlebar ends.
●YAMAHA Bikes
It can be installed on handlebars with handlebar ends machined with M16 pitch 1.5mm.
●KAWASAKI Bikes
It can be installed on handlebars with M8 nuts welded to the handlebar ends.