* 該前叉設計用於10英寸車輪。由於大的卡鉗,8英寸的車輪只能使用到庫存尺寸。
在這種情況下,實際產品將被優先考慮。在這種情況下,實際產品將被優先考慮,盡管它可能與呈現的圖片不同。
*請在與摩托車維修有關的專業商店進行組裝。
*雖然這是一個真正的替換零件,但如果有必要,請進行相應的調整。在4l/5l的中國車架上已經檢查了安裝兼容性。
* 我們不驗證與其他公司產品的兼容性。
*Winker支架和大燈支架不包括在內,必須單獨准備。
*輪子需要中心設置。除了提供的零件外,還需要調整零件,請根據您使用的輪子單獨准備。
* 每個產品的小細節可能會有輕微的規格變化。請注意,與介紹中的圖片可能有細微差別,但將優先考慮實際產品。
*開始行駛後,請注意所謂 "初始松動 "的發生,並進行頻繁的檢查,以避免出現意外問題。
*由於運輸問題,可能會出現小的劃痕和擦傷。
* 保修不包括除嚴重損害產品功能以外的任何缺陷。
*產品安裝完畢後,不接受任何理由的退貨。此外,車輛開始運行後出現的任何問題,往往是由駕駛條件、維修條件或車輛狀況不匹配造成的,很難與個別產品的原因區分。
請注意,該產品是在海外制造的,可能沒有其他產品做得那么好。由於運輸問題,可能有一些輕微的劃痕和擦傷。
*其他顏色包括在圖像中。
請注意,由於制造商的原因,產品規格可能會有變化。請理解。
■5L type Φ45 inverted custom front fork set
・Φ45 outer (already assembled)
・Upper and lower stem bearings and races for monkey frame (already assembled)
・Handle lock plate (already installed)
・Special Φ33 inner tube for exclusive use (already assembled)
・L=255mm axle shaft (already assembled)
・Special meter gear (for 10 inches) (already assembled)
・Disc hub (already built in)
・Dedicated disc rotor offset spacer (already installed)
・Adjustment collar (already assembled)
■Specific brake master cylinders and single-press 2POD brake calipers
■Dedicated Φ187 wave disc rotor
■74cm square-to-rectangular meter cable
■Fork length: 540mm (from top of stem top bracket to center of axle shaft) (Stock: 480mm)
■Fork pitch: 198mm (core-to-core) (stock value +30mm)
■Outer color: Black anodized aluminum / Silver anodized aluminum
■With hydraulic disc brakes
■Country of origin: China
■Manufacturer: KEPSPEED
[Notes on purchase]
*All GM-MOTO products are custom parts.Since these products are set up in response to the requests of heavy users, there may be parts of the product that change or decrease from the original driving performance.Please use as dress-up parts for show model machines.Therefore, it is not suitable for driving on public roads or tracks.In some cases, it may not be possible to mount the unit on a motorcycle, or adjustments and modifications may be required in various areas.
*This front fork is designed to be used with 10 inches wheels.Due to the large caliper, 8 inches wheels are only available up to stock size.
*Please note that there may be slight specification changes in each part.In such a case, the actual item will be given priority, although it may differ from the image shown in the introduction.
*Please have assembly work done in a specialist shop regarding motorcycle maintenance.
*Although these will be stock replacement parts, please make adjustments as necessary.Installation compatibility has been confirmed with 4L/5L Chinese frames.
*We have not verified compatibility with other companies' products.
*Blinker brackets and headlight brackets are not included.
*Centering is required for wheels.Adjustment parts other than the supplied parts are required, but please prepare them separately according to the wheel you use.
※There may be some minor specification changes for each product.The actual product takes precedence over the images shown here, which may differ slightly from the images shown here.
※After the start of riding, pay attention to the occurrence of so-called initial loosening and perform frequent inspections to prevent unexpected problems.
※Some minor scratches and scuffs may occur due to transportation issues.
※GM-MOTO does not accept returns for any reason after the product has been installed.In addition, problems after the start of driving are often caused by driving conditions, maintenance conditions, or a mismatch with the condition of the vehicle, and are difficult to distinguish from the causes of individual products. GM-MOTO is not responsible for any problems.
*Because it is made overseas, the molding, welding, painting, etc. may be insufficient.There may be some minor scratches and scuffs due to transportation problems.
*The image may contain other colors.
*There may be changes in product specifications due to the manufacturer's reasons.