*本產品可與Kijima的號碼鞍囊護罩(Kijima零件編號:hd-07912)結合使用。
*側袋的假定安裝尺寸型號為Degner零件號:NB-1或Kijima零件號:ZK3-10003B。大於這些的側袋不應與Kijima數字側支架套件(Kijima零件編號:hd-013911,Kijima零件編號:hd-013912)一起使用,因為它們可能會干擾並導致數字側支架在車輛行駛中上下移動時脫落。
*本產品可拆除原廠牌照托架,拆除後請小心保管。
*與原車狀態相比,懸空的情況明顯不同,所以在習慣之前要謹慎駕駛。
*騎行前一定要進行操作檢查(檢查車軸螺母、車軸調整螺母以及主機上的裝配螺栓和螺母是否松動)。如果發現任何異常情況,請立即停止使用。
* 如果受到外部沖擊,不要強行退回,一定要進行檢查。
*本產品是為庫存條件設計的。避免與外部懸架、消聲器更換、發動機調整或其他明顯改變振動的項目結合使用。
* 本產品的設計是為了單獨使用。切勿在安裝了尾燈或裝飾性配件的情況下駕駛車輛。這樣做可能導致損壞。
* 使用本產品的車輛檢查是用戶的責任。
*這些車輛不一定能通過車輛檢查。事實上,各車管所的標准不盡相同,有些車輛可能被檢查合格,而有些車輛可能被檢查不合格。檢查前請咨詢車輛檢查員進行檢查。
*接線很細,因為這是終極小指標。安裝時的線路改造需要減震等技術,如果你不確定或擔心,請聯系離你最近的哈雷-戴維森授權經銷商,征求意見或進行調試工作。
* 該指標已被授予ECE類型認證e-mark。
其他產品也包括在圖片中。
請注意,由於制造商的原因,產品規格可能會有變化。請理解。
[Material]
・Bracket: Steel
・Arm: Aluminum
[Set components]
・Number side mount kit
・LED Nano combination brake and tail lamps
・Instruction Manual
*This product is designed for use with Kijima's number saddlebag guards (Kijima Part Number: HD-07912) can be used together.
*Anticipated mounting size model for side bags is Degner's Part No.: NB-1 or Kijima part number: ZK3-10003B is used as the assumed mounting size model.For larger side bags, use Kijima's license plate side mount kit (Kijima Part No.: HD-013911, Kijima Part No.: HD-013912) and the bike may interfere with each other and the number side mount may fall off when the bike is moving up and down during a ride.
*This product removes the stock license plate bracket, please keep it in a safe place after removal.
*The overhang is noticeably different compared to the stock condition, so please drive with caution until you get used to it.
*Be sure to check the axle nuts, axle adjusting nuts, and the looseness of the assembly bolts and nuts of the main unit before riding.If any abnormality is detected, stop the use immediately.
*When an external shock is applied, do not force it back, and be sure to inspect it.
*This product is designed for standard conditions.Please do not use any aftermarket suspension, exhaust replacement, engine tuning, which may significantly change the vibration from the stock.
*This product is designed to be used alone.Never drive with tail lamps or decorative accessories installed.Doing so may result in damage to the product.
*Bike inspections using this product are the responsibility of the user.
*The wiring is thin because of the ultimate smallness of the blinker.Wiring modification for installation requires some techniques to reduce vibration, If you are unsure or concerned about this, please contact your nearest authorized Harley-Davidson dealer for advice.
*The blinkers has been certified by ECE type approval E mark.
*Images may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.