*我們建議由於降低,必要時縮短側架。(短的側架必須由客戶提供)。
* 根據要降低的高度,中央支架可能無法使用或必須拆除。
*該圖像是同一低下部分的代表圖像。可能與實際產品不同。
* 建議調整前叉,使其與前叉的突起相匹配。(對於可調整的模型。建議的調整值在手冊中給出)。
* 下降高度為60毫米,不能串聯。
這些圖片僅用於說明問題。請注意,產品的型號和顏色可能與圖片所示不同。
請注意,由於改進和規格變化,實際產品的顏色和形狀可能有所不同。
由於拍照的原因,其他產品也可能顯示在圖片中,但只有標題中的產品會被交付。
請注意,由於制造商的原因,產品規格可能會有變化。請理解。
Cushion arm plate replacement type
Down high: Approx. 60mm
*By lowering the motorcycle, it is recommended that the side stand be shortened as necessary.(Please prepare the short side stand by yourself.)
*Depending on the height of the downward adjustment, the center stand may not be usable or may have to be removed.
*This image is a representative image of the same type of lowering parts.The actual product may differ.
*It is recommended to adjust the front fork protrusion to match.(For adjustable models.Recommended adjustment values are given in the manual)
*60mm down height can not be used when riding pillion.
*Images are for reference only.Please note that the model and color of the product may differ from those shown in the photos.
*The actual product may differ in some colors and shapes due to improvements and specification changes.
*For the convenience of photography, other products may also appear in the image, but only the item in the title will be delivered.
*There may be changes in product specifications due to the manufacturer's reasons.