Installed on 1987 TW200. Exact same dimensions as the original. Tightened to 27 ft lb, then back off one turn, then did a final tightening of 13 ft lb. The other bearing needed for a 1987 TW200 is the 93399-99942View Detail

Brake fluid reservoir mount for Yamaha YZF R1. I changed the mount once because it was broken. The mount is made of plastic. The mount has a hole through which the clutch cable passes.View Detail

The original special washer in the traverse on the YAMAHA YZF R6 04. The special washer hopes on the top of the two nuts, connecting them does not spin. Because there is a rubber gasket between the nuts.View Detail

The original ball cover in the crosshead on the YAMAHA YZF R6 04. The ball cover is designed to keep moisture and dirt out of the crosshead. The ball cover rests on the traverse and is pressed tightly against the frame. It performs its function well.View Detail

I am leaving a review for a part that I installed on a 2004 YAMAHA YZF R6 motorcycle. This is the horn guard and is attached to the bottom of the steering gear of my motorcycle. The protection is made of plastic. Bends well. It is installed practically without difficulties. I installed a different protection due to the fact that the old one was damaged during the accident. Good quality protection. I recommend.View Detail

After removing the side cover from previous maintenance there was a small dink on the pin so instead of trying to bend it back I decided whilst ordering other parts to just buy a new one. Finding was easy using Yamaha schematics links. The ocst was super cheap and just what I needed.I buy many parts per order and this was also one of many. Because of this, the shipping is very good. Obviously, the weight of small parts like this is low and this is reflected in the shipping cost.I used EMS this time as their price was slightly better than Fedex.All arrived at my address within a week of ordering. The outer box was sealed and nothing could escape, nice touch Webike, I like that.The contents were all packed really well and with the additional bubble wrap filling all the empty space, nothing was damaged in trasit.The dowel (pin), was very well made adn machined. No sharp edges like some aftermarket parts I have had before. Drifted the dowel in was easy but just take your time not to put in too dar. Very happy customer, thank you Webike, great work.View Detail

Part 2 of the seal change for the forks. I decided this time to go for genuine Yamaha OEM ones. Definitely needed changing along with th main fork seals Very easy to find the correct one using the tools Webike provide with links to manufacturer schematics etc. The cost of the parts was really very good and the shipping, EMS was really good as I also had other parts in the same order. Arrived at my door in less than a week from the day of ordering. Japan to UK, how good is that. The seals themselves are just seals but it's only until you install them and give them some time that you realise the genuine ones will ALWAYS outlast the cheaper alternatives. Never again will I buy cheap no brand parts. It's just not worth it in the end. One very happy bike and now, one very happy customer. Thanks Webike, keep up the great work and serviceView Detail

I have had to change out a lot of seals recently for one reason or another and this was also a set of them. I decided this time to go for genuine Yamaha OEM ones. Small leaks end up being big problems so definitely needed changing. Really easy to find the correct one. Price was very good and the shipping, EMS was really good as I also had other parts in the same order. Delivered to my door in less than a week from the day of ordering. Japan to UK, how good is that. Excuse the dirty packaging, The seals are perfect and yes, they are just seals but you want them to look like they shpul;d and therefore, work as they should. I have purchase daftermarket seals before for other bikes and trust me, some of those look like they have been cut out using blunt scissors. Never again will I buy cheap no brand parts. It's just not worth it in the end. ALL I can say for this order and the parts included is brilliant, very very pleased. Thanks Webike, keep up the great work and serviceView Detail

I needed a few parts to get the servicing underway for my MT09. Not had a lot of love from me for a while. The gasket was easy to find the correct part using Yamaha schematics. The cost was really good from Webike as always. I purchased other items for the servicing and this spread out the shipping costs and made them better than I thought.Everything was very well packed and arrived via EMS within a week of ordering.The gasket is perfect, no sharp edges and fitted easily. Very happy customer, keep up the great work Webike View Detail

SOme servicing needed and along with other parts were these plugs.I generally go for the OEM plugs for the Yamaha bikes as I know what I'm getting then.These were easy to find using the tools provided by Webike and all the links to the manufactyrers websites.The cost was very good and purchased a set of 3 for my MT09.The shipping was really good as I had a few other parts for the serviceing in my order. I used EMS this time and everything arrived within a week.All packaged very well and no damage to anything in the order.The plugs themselves are perfect. Once fitted, the bike just feels smoother. Take your time and don't over tighten.Happy customer. Thanks WebikeView Detail