About quality and texture: I am happy with the quality of the engine reinforced plate from G-Craft. Made from aluminium and machined to allow for high strength and light weight. About the feeling of use: The engine reinforced plate allows for an addition connection between the engine and the frame which leads to a noticable reduced movement and vibration. Products to buy together: A set of steering stem stabilizers from Outex would also be desirable to purchase alongside the engine reinforced plate to also add some reinforcement to the steering. Difficulty of installation: The process to install takes about 20 minutes, position the engine reinforcment plate and install the 4 bolts into the engine followed by the 6 bolts that clamp the plate around the frame. Not difficult to do. Cost performance and comparison with other products: High costing but you are getting a beauitfully designed product made from quality aluminium stock. With there being no other branded product like this there are non to compare. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: I see no concerns or cautions to be advised of in regards to this product. If you are looking finely detail your Grom then go for it. View Detail

Very well made, smaller than expected but the results are brilliant. Bike vibrates like a paint shaker as before, but the high frequency numbing vibrations have been dulled/removed from the experience.View Detail

I bought the one for Grom because it is a common Frame, but I bought the one for JB-02MONKEY125. Not available." It was
Looking at the original and the service manual, I found that the obstruction was the part for attaching the plate that holds the exhaust pipe (the part that wraps around the exhaust pipe under the engine) = it is additionally welded to the frame.
However, the above standard installation plate is a simplified version of this product in terms of functionality.
Specifically, there is an approximation in the sense that the two Bolt locations under the Engine (this product has four Bolt locations) are connected to the Frame.
It was also frustrating to put back the OEM parts that we had taken the trouble to remove, so we prepared the following parts for the installation of this product. Vibration Damping Washer M2052 I incorporated it into the return of the M8 and M10 of the +Rear Sets (also incorporated into the Footpeg installation portion of the +Rear Sets).

This product has nothing to do with the footpeg, but it has relieved the vibration of the footpeg, which I was having trouble with! I bought this product for this effect and prepared a vibration suppression washer, but if the product had been installed, the effect would have been even greater. 。 It looks like it cannot be installed without Frame modification.View Detail

I changed to this one because the serviceability is better than NORMAL, and I'm satisfied with the construction.View Detail

he thought that it probably adhered well and bought it A thing is good too. truly, G Craft description is also kind and which die length is where -- etc. -- very kind Since a Clutch cover is different.Naturally, although several are different, they suit almost. It was about three to have bought it with the addition. It was impressed that the plate Screw of the generator was a hexagon socket. Since it licked here, it was saved in that of the method of したっ in the hexagon head.View Detail

About quality and texture, I can confirm that the quality is great and that the materials used are a combination of cast aluminum for the clutch cover and machined aluminum for the oil filter cover.About the feeling of use, I find the Kitaco clutch cover the best option if you are just looking to add a cartridge oil filter to your Honda Grom. The styling of the clutch cover and all black painted finish is well suited to the rest of the engine.Products to buy together, Adding an adjustable clutch lever to your cart to help personalization your clutch lever setup position woud be ideal.Difficulty of installation, I can say the fitment of the clutch cover kit for my installation was average, there is special tooling needed and the process of removing the unwanted original Honda parts, transferring some over and installing the new Kitaco parts takes some time.Cost performance and comparison with other products, The pricing of this product is great when compared to all the other aftermarket clutch cover kits available because it is a less complex in design and you utilising some of the original clutch cover parts.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is aluminum that is CNC machined to shape and finished with a silver anodized finish.About the feeling of use, This starter motor cover is of a strong construction with a subtle design and does a wonderful job enhancing the finish and complimenting the other high quality covers on the engine.Products to buy together, Other higher quality parts to help improve the look of other original plain looking parts like the front sprocket cover would be ideal to add to your cart.Difficulty of installation, I can say the fitment of the starter motor cover for my installation was very easy due to the ease of access and simple nature of securing the cover onto the engine using the included hardware.Cost performance and comparison with other products, The pricing of the product is great. You receive a subtle design part made from high quality material with a matching finish. There are other options available but it depends on the design you prefer.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is steel for all parts of the drive chain and is of a non sealed style chain.About the feeling of use, Perfect introductory priced 420 drive chain for a original engine setup. I find the drive chain requires much less adjustments to keep the recommended chain slack then the original drive chain.Products to buy together, The drive chain system on any typical motorcycle is made up of three parts that ideally are replaced together so it would be good practice to also add a front drive sprocket and rear driven sprocket to your cart.Difficulty of installation, I can say the fitment of the drive chain for my installation was very easy due to the simple process of connecting the drive chain ends with the joining link and open access to the swingarm area.Cost performance and comparison with other products, Pricing of this product is great, You receive a drive chain made from quality and stronger materials. There are no cheaper options with the 420 pitch design that I could find, even the original Honda part is more expensive.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is S45C steel which is a high carbon steel resulting in a lighter and harder wearing part.About the feeling of use, A better looking and performing driven sprocket then the original Honda part which is the perfect choice for my Monkey 125 with the power the original engine is outputting.Products to buy together, The drive chain system on any typical motorcycle is made up of three parts that ideally are replaced together so it would be good practice to also add a front drive sprocket and drive chain to your cart.Difficulty of installation, I can say the fitment of the driven sprocket for my installation was average due to the access required but simple in nature of placing the sprocket into the hub and securing with the locking nuts.Cost performance and comparison with other products, The pricing of the product is great. You receive a sprocket made from quality and light weight material. There are no cheaper options with the lightweight design that I could find, even the original Honda part is more expensive.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is a soft rubber that is firm yet flexiable when positioning.About the feeling of use, This larger diameter connecting tube is the only way to help connect between the original air cleaner box and the Takegawa big throttle body and I find I can still achieve my performance goals while retaining the original air cleaner box for everyday use.Products to buy together, If you are looking to get every bit of performance out of the original air cleaner box then it would be ideal to add the large diameter air duct for the inlet to your cart also.Difficulty of installation, I can say the fitment of the larger diameter connecting tube for my installation was average due to having to remove the air cleaner box for access to enlargen the hole for the tube to fit in place.Cost performance and comparison with other products, The pricing of the product is great. You receive a larger diameter connecting tube made from quality rubber that is designed to allow you to retain the original air cleaner box with a Takegawa big throttle body.About shipping and packaging, My order was shipped within 48 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail