OEM Hub SprocketBolt with Quantity:I'm going to replace the long bolt in the set, but the size of the long bolt is too large to fit into the OEM hub...

In the manual It's pretty hard. And
I don't want to say it's hard, but the size is slightly different!
There was nothing I could do about it, so I zagged the hub side with a ball board and installed it.

I thought the Off-set Plate would be attached with this, but now the hole of the Off-set Plate is too small, and the long bolt that I installed doesn't fit...
The instructions are "It's too tight, so you'll have to hit the Plate with a plastic hammer, etc."
I don't know. I don't think it's the right size.
I ended up drilling this one with a ball machine...

I didn't want to use a cheap Chinese, so I chose the expensive GCraft product and was disappointed. However, you can't go wrong as the build quality is very good.
Maybe yours is the only HaGap you have, but if you only have common tools, there is a good chance you won't be able to install it.

It requires a certain amount of machining skill and tools.View Detail

I purchased it to adjust the clearance by widening the rear tire. At first I used the 4mm Offset Spacer of G-craft, but because the gap between the Swing Arm and the SuspensionBolt became very small, I changed it.
However, I used Stud bolt when using 4mm Spacer as it is, but the hole of Spacer did not go into the part which does not have Screw mountain, so I shaved the hole and expanded it.
It may be difficult because the parts require precision, but it would have been nice to be able to install them without machining on G-craft-to-graft parts.View Detail

MONKEY Swingarm 16 centimeters wide and changed to 4j foil Tire 130-70-10 so I will issue a Chain line Sprocket spacer 8m I bought it. The Stud Bolt of Normal hub could not be easily removed and it was Large strange. In the manual, it was supposed to be 28 mm, but I was 23 mm and the Sprocket was painful.
View Detail

I thought that I want to put 4j in Rear of MONKEY and I bought 4mm Spacer. My MONKEY uses Drum brake of 4 LMONKEY, but the difference between 5 l and 4 l or the size of the attached Stud bolt was too long so that Stud bolt interfered with Swingarm and could not be used.
I would like to install with Cap bolt or Stud bolt off.View Detail

Although it worried with the Manufacturer besides
purchased in order to use rear 5.5j specification of a MONKEY this time [ Webike Monitor
], it decided by liking to arrange by the Manufacturer, and a reliable Brand.Since it has come also out of

Tire Center perfectly, it is Mr.
G Kula truly and was peevish, and it became in ~
and is satisfied.View Detail

This was great solution for me to move my key barrel away from the headlight. The quality was really good, it was easy to fit and looked very factoryView Detail

The z50 baja items are not available from the factory anymore so these are a great after market option. This fit really well and look OEMView Detail

The z50 baja items are not available from the factory anymore so these are a great after market option. This fit really well and look OEMView Detail

I upgraded to wide front wheel and this was awesome to make everything work and align properly. Super easy to fit and high quality itemView Detail

I upgraded to wide rear wheels and this was awesome to make everything work and align properly. Super easy to fit and high quality itemView Detail