A specialty part when working on camshafts with a certain decompression mechanism

About quality and texture - The knob screw x2 from SP Takegawa is made from steel and plastic, the quality from the overall fit and finish is perfect.About the feeling of use - A special tool for working on camshafts with a certain decompression mechanism. This was necessary for me to purchase when piecing together parts for my engine overhaul as it was not included with the purchase of the motorcycle.Products to buy together - A key product to purchase when freshening up the top end of the engine is a new gasket set as it is far from advised to reassemble this area with used gaskets and the snap ring used in this area is also advised to replace.Difficulty of installation - The installation of the knob screw is an simple task that took 0.1 of an hour to complete. Common sense is all that is required to secure the knob screw to the decompression mechanism shaft.Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the knob screw x2 is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the knob screws, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is aluminum that is CNC machined to shape and finished with an all black anodized finish. About the feeling of use, The repair shaft nut has paired perfectly with my previously purchased crankshaft support adapter. Products to buy together, Other parts to help improve the reliability of the Honda 125cc horizontal engine like the Takegawa cam chain tensioner would be ideal to add to your cart. Difficulty of installation, I can say the fitment of the shaft nut for my installation was average due to the amount of access required to get to the internals of the engine and the special tools needed to complete the installation. Cost performance and comparison with other products, The pricing of the product is good. You receive a high quality material repair item that will save you money from purchasing a complete crankshaft support adapter. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture - The left crankcase guard from Kitaco is made from billet aluminum with detailed machining and a silver anodized surface finish, the quality from the overall fit and finish is perfect.About the feeling of use - The left crankcase guard does an awesome job increasing the protection on the Monkey 125 while not looking out of place up against the silver engine covers .Products to buy together - A key product to purchase when looking to further increase the protection on the Monkey 125 would be front and rear billet aluminium axle sliders.Difficulty of installation - The installation of the left crankcase guard is a simple task that took 0.5 of an hour complete. Some mechanical aptitude and the use and the use of basic hand tools is what is required to secure the left crankcase guard directly over the top of the generator cover. .Cost performance and comparison with other products - I find the cost of all the products Kitaco sell to great value when compared to what most other companies sell their products for but the left crankcase guard is priced higher.About shipping and packaging - With there being no cost difference between sea freight and EMS for the left crankcase guard, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The slip-on exhaust system from Akrapovic is made using titanium for the exhaust piping, the end caps and the sleeve, the quality from the overall fit and finish is perfect.About the feeling of use - This slip-on exhaust system offers massive savings in regards to it's weight over the original heavy steel exhaust system and the deep sound of the exhaust sure does not disappoint either.Products to buy together - The Honda Grom has no carbon fibre parts fitted from the factory, so the purchasing of other light weight parts to compliment the titanium exhaust is what I would recommend.Difficulty of installation - The installation of the slip-on exhaust system is a simple task that took 0.5 of an hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to secure the exhaust piping to the exit pipe and the sleeve hanger to the rearset plate.Cost performance and comparison with other products - I find the cost of all the products Akrapovic sell to be higher then what most other companies sell their products for and this slip-on exhaust is no different. About shipping and packaging - With there being a significant cost difference between sea freight and EMS for the slip-on exhaust system, I chose sea freight so I could put the saved money toward other additional parts. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The right crankcase gasket from SP Takegawa is made from a modern synthetic fiber gasket, the quality from the overall fit and finish is perfect.About the feeling of use - No noticeable oil leak from the old gasket but after having the clutch cover removed for some time with the gasket exposed, I was not confident the gasket would seal well if re-used so the gasket was replaced this time around.Products to buy together - A key product to purchase when carrying out general maintenance on the engine is a new crush washer for the oil drain bolt as this bolt is removed quite regularly for oil changes.Difficulty of installation - The installation of the right crankcase gasket is an simple task that took 0.5 of an hour to complete. Some mechanical aptitude and the use of basic hand tools is required to secure the gasket between the right crankcase cover and the crankcase.Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products and the right crankcase gasket is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the right crankcase gasket, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The 6x22 pan screw from Honda ia made from steel with a zinc surface finish, the quality from the overall fit and finish is perfect.About the feeling of use - During removal of the front fender and disposal of the original orange reflectors, new fasteners were required. Replacement pan screw ensures cleaner installation of the front fender, as this is where they are used on the Honda Grom.Products to buy together - Key products to purchase when removing components for maintenance as a bike ages are replacement fasteners, all genuine Honda parts are available here on Webike for the Honda Grom.Difficulty of installation - The installation of the pan screw is an simple task that took 0.1 of an hour to complete. Common sense and the use of basic hand tools is all that is required to secure the front fender to the lower fork leg using the pan screw.Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for and the 6x22 pan screw is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the 6x22 pan screw, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The sports camshaft from SP Takegawa is made from cast and machined steel, the quality from the overall fit and finish is perfect.About the feeling of use - I have been riding the Monkey 143cc with sports camshaft now for 3000 kms and I have to say, with the higher lift camshaft the increase in high RPM power is crazy when compared to the original camshaft, which I did use with the 143cc for a short period of time so I could compare.Products to buy together - The key product to buy together with the sports camshaft is the DynoJet Powervision 3 for your new and required fuel map, which is available from DynoJet to download.Difficulty of installation - The installation of the sports camshaft is an intermediate task that took 1 hour to complete. Mechanical aptitude and the use of basic hand tools is what is required to secure camshaft in the head and set the valve clearances.Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products but the sports camshaft is priced higher.About shipping and packaging - With there being no significant cost difference between sea freight and EMS for the sports camshaft, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail