Genuine Honda Right Exhaust Band for VFR800 2003

After receiving the other parts for the CRF1000 2020 project bike in my garage. I have forgotten one of the exhaust clamps. The old clamp was not doing it's job as it should, I went for the replacement instead of trying to patch something up. I highly recommend using genuine Honda clamps as it just makes sense. I found the correct part number by using the tools provided by Webike to link to the manufacturers website. Easy. As this was part of a larger order with many parts, the shipping worked out to be brilliant and better value than you would imagine. This cut down the cost of shipping by quite a lot. EMS express shipping was used this time and delivered within 5 days from order. All was packed neatly inside the sealed box. Yes, Webike sealed the box with tape so nothing could get lost or fall out during transit. Webike also filled any empty spaces in the outer box with additional bubble wrap so nothing could get damaged in transit. Even the small parts like this one arrived in perfect 100% condition. This clamp is very well made and the materials used are really top quality and robust. The clamp is also coated in a lovely chrome finish which really adds to the quality. The exhaust clamp is perfect and just what was needed to help move along the project. Very pleased with the result. Thank you Webike. Great service and will be back View Detail

About quality and texture, I can confirm that the quality is great and that the material used is ABS (Acrylonitrile Butadiene Styrene) plastic with a integrated matt black finish. About the feeling of use, The silencer end cover is light in weight and does a great job transitioning from the heat shield to finishing off the end of the silencer. Products to buy together, The original exhaust system has a chrome heat shield while the rest of the system is black. A black or carbon fiber heat shield would be ideal to add to your cart for a stealth looking exhaust system. Difficulty of installation, I can say the fitment of the silencer end cover for my installation was very easy due to the simple nature of the manufacturers mounting of the cover. Cost performance and comparison with other products, The pricing of the silencer end cover is great. You receive a product with a high quality surface finish that is much cheaper then the carbon fiber option available from Tyga Performance. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

The joint that attaches to the radiator on this bike had become dislodges and then snapped off at the very tip. I decided that there was no other option than to just buy a new OEM breather joint. I already found the right part number when searching through Honda schematics for the CBR1000RR model. Not a hard part to find to be honest. Webike price was really good value to which also made me smile. Compared to eh local Honda dealer, this was well under half the price. I did have some other parts that needed shipped and so I got them all shipped together. In a very short amount of time, like 5 days, my order arrived via EMS. My parts were very well packaged and even the outer box was sealed and the inner filled with air pockets to keep the parts safe and secure. This breather joint was inside the standard Honda sealed packet and was well protected. The part itself was well moulded and there are no sharp of extra pieces attached. I measured the diameters of the ends and they were within specifications. The wuality is excellent and the breather joint is a strong looking one. At the end of the day, it fitted correctly and did what it was meant for. That to me is a total win. Happy customer, thanks guys View Detail

After the owner decided to change the exhaust on this CB1000R 2019, the exhaust gaskets were in need of a new ones too. No point in adding an old ones when it will probably not work for long and then you have the job of removing the pipes again to do it right. Not a massive job but you might as well get the new gaskets beforehand really. Finding this gaskets for this bike was not super hard or anything as this also fit a lot of other, older Honda models, so they are readily available. Webike price was really good value and added to some other parts already in my basket, the shipping worked out well. Shipped with EMS and arrived in 5 days from shipping. Well packaged, the standard Honda packets that these gaskets came in and were also inside a bubble wrap envelope to keep them safe. The gaskets are nothing really special but it does hold an important jobs, to keep all the emissions going one way. Very tidy little gaskets and easily fitted in a few minutes. Very pleased, thanks Webike, great job View Detail

Earlier I encountered some noise in my bendset. After inserting this the sound went away. genuine product Cost performance and comparison with other products Good value for money. About shipping and packaging Fast shipping and very good packaging. highly ercomended.View Detail

I had forgotten about some of the smaller parts to refit the rear arm on the MT09 and this included a few collars and bolts etc. Time to order all of those to help the project along. Finding the right collar was pretty easy as I had already seen the schematics for the rear arm section. These collars are small and yes, you could possible reuse the old parts but as this did not have any anyway, I needed to purchase them. For this project I needed just one so added to my basket and a few other small parts. I had them all shipped together which would save a little on shipping costs too. Every little helps you know. EMS had my delivery made within 5 days from being shipped which you cannot argue with. These small collars and some of the bolts were inside a bubble wrap envelope to keep them safe and also to stop them from being lost etc. The packaging was a simple Yamaha bag but that was fine. The collars are not really much to look at but they are very well made and are exact to the specifications needed for the job in hand. Once fitted I will update my review. One happy customer. Thanks Webike View Detail

This bike came in with a bent gear shift lever due to a small accident. It was still functional but did not look great. I did try and straighten it but it still looked bad so a new one was the way to go. As this is a pretty new bike, the parts are readily available and finding the right lever for this bike was easy using the Honda schematics. The price from Webike was really good and even with the shipping cost, it was still cheaper than buying locally. With a couple of other parts on order, I had all them shipped using EMS who are just quick at delivering. In 5 days, my order arrived. All very well packaged and in tact. The gear shift lever did come in the Honda packet and was protected with bubble wrap too. The finish of the lever was really smooth and the satin black paint really finished off the look. The lever is a very strong one but does have a tendency to bend if you have a small low side which is what happened here. Not a problem, all fitted and the bike looks a lot better for it. Thanks Webike View Detail

I wanted to get some new well nuts in this size as I did not have any spares in the garage for this refurb on the Ninja 1000SX. The price was really good and cheaper than some on the other after market brands anyway that I could get. I decided to get the Kawasaki ones as I have had a few other parts from this brand and I am honestly, very impressed with how well they are made. With a couple of other items in my order, I had them all shipped using EMS and the package arrived in 5 days. Everything was well protected from any damage. The well nuts came in the Kawasaki standard packet and were well presented. They are a really neat part that everyone should have some spares as you just never know when you will need them. These were the M5 size and this is usually the size that fits with a lot of panelling on a lot of different models. They also fit a lot of other manufacturers factory screens and various area too. The quality of these is not really easy to work out until you actually use them. I did have a screen that needed a new well nut fitting so I used one of these. Definitely recommend them as they just work how they should. None of the spinning of the thread and worked exceptionally. Very happy with these. View Detail

This was the oil seals for the front wheel on the MT10 2021 which also needed new front wheel bearings and spacer bearing. I do always replace the oil seals when it comes to any bearings where possible for my own peace of mind. It just makes sense to do this. Finding the right oil seal was easy as I already had the schematic open for the front wheel bearings anyway. The price for the new seals was great value. At this price is was silly not to get them. With the other parts needed for this replacement, I had all the order shipped using EMS which are my chosen and trusted courier. My order arrived in 100% perfect condition in 5 days from being shipped. The oil seals came in the standard Yamaha packets and were also inside a nicely made bubble wrap envelope by Webike warehouse to keep them safe. The oil seals are pretty rigid if I am honest but that is not a bad thing. They are top quality oil seals which you expect from such a well respected manufacturer like Yamaha. With a tiny bit of oil to seat them easily, the job was complete and now the front wheel moves freely and smoothly as it should. Great job guys, very pleased with this purchase. View Detail

After doing some maintenance on this bike, specifically the front wheel bearings. I found that the main spacer bearing was also damaged on the front wheel. This is not a good thing so I just decided to buy a new one rather than having this one re-worked. Finding the right spacer bearing for this bike was not hard as I used Yamaha schematics. The price I found from Webike was far cheaper than my local Yamaha dealer could match. Not a problem, I like using Webike for the parts anyway. In 5 days from being shipped, the order arrived. I used EMS and they just delivery really fast. This is not a light part but Webike accommodated this by heavily wrapping it in padding to stop any damage to any of the smaller parts including the oil seals and bearings in the order. The spacer bearing itself is a very well machined part. This really needed to be right in all the specifications as it is a spacer of sorts for the front wheel. No one wants anything to go wrong at the speeds the MT10 will go. I double checked all the tolerances beforehand and all were spot on. As this is just a simple spacer, there are no threaded sections to worry about. You do however need to take care when fitting not to knock on anything. This was easy to do but take your time. Once fitted, the rest of the parts within could also be added. Now the wheel moves freely and there should be no unexpected issues in the future. Very happy with this purchase View Detail