568.75 HKD
(11,000 日元)
493.21 HKD
(9,539 日元)
(
13% 折扣
)
4 (15 評論)
Excellent
I am satisfied with my purchase.I purchased this product for MotorcycleMaintenance Nans.
I've also purchased for Rear before and found it to be of good quality and easy to use.
We chose the sameSeries.
There is no problem with the quality etc. of this one, and the condition in which it was sent to me.
There was no problem
I'm satisfied
Reviews For DAYTONA 前輪駐車架 From Other Webike User
Terrible
Note that some vehicles are not available.Be careful when the bottom of the Cowl lifts the SS system! It will hit the bottom of the cowl just before it goes up. It is difficult to stop because it is just before it goes up, and a large motorcycle will break into balibali, so use a JTrip!
The product description also notes that if the Hose or Wire is hit, but...
When I first bought it, it was working fine on my MT09, but when I hit the bottom of the cowl on another vehicle, I discovered that I could not use it, and the return period was over. I didn't know that there are vehicles that can't use the product because it is not sold separately!
In my Image, it was DAYTONAUp with good cosmetics, but the thing still became a second-rate product.View Detail
Poor
Axle Shaft is stuck.I can't replace the tire because the axle shaft is stuck in the front up position. If you want to remove the wheel on CB1000R, please use another company.View Detail
Very Good
You can use it.I wondered if it would really work, but then I tried it. It worked (laughs).
However, I was trying to pull out the Axle Shaft on the front, but depending on the position, the STAND interfered with it and I couldn't pull it out.
Maybe it was the 12-inches MONKEY that had to be raised higher than necessary?
However, it's much cheaper than other front stand products, and I think it's a good deal.View Detail
Very Good
Used on GSX-R125I used it on my GSX-R125, and although the OEM cowl slightly hits the standdbody, I was able to use it. multiple attachments are included, and I think the cost is good.View Detail
Excellent
For my first Maintenance Stand!I've never had a STAND before.
I think it's time to get one, so I thought I'd give it a try.
I bought the one from DAYTONA.
The texture and feel are not as good as J-TRIP's, but
I think it can be used for daily maintenance without any problem.View Detail
Most Viewed Reviews Of DAYTONA Front Stand
Terrible
Note that some vehicles are not available.Be careful when the bottom of the Cowl lifts the SS system! It will hit the bottom of the cowl just before it goes up. It is difficult to stop because it is just before it goes up, and a large motorcycle will break into balibali, so use a JTrip!
The product description also notes that if the Hose or Wire is hit, but...
When I first bought it, it was working fine on my MT09, but when I hit the bottom of the cowl on another vehicle, I discovered that I could not use it, and the return period was over. I didn't know that there are vehicles that can't use the product because it is not sold separately!
In my Image, it was DAYTONAUp with good cosmetics, but the thing still became a second-rate product.View Detail
Poor
Axle Shaft is stuck.I can't replace the tire because the axle shaft is stuck in the front up position. If you want to remove the wheel on CB1000R, please use another company.View Detail
Very Good
You can use it.I wondered if it would really work, but then I tried it. It worked (laughs).
However, I was trying to pull out the Axle Shaft on the front, but depending on the position, the STAND interfered with it and I couldn't pull it out.
Maybe it was the 12-inches MONKEY that had to be raised higher than necessary?
However, it's much cheaper than other front stand products, and I think it's a good deal.View Detail
Very Good
Used on GSX-R125I used it on my GSX-R125, and although the OEM cowl slightly hits the standdbody, I was able to use it. multiple attachments are included, and I think the cost is good.View Detail
Excellent
For my first Maintenance Stand!I've never had a STAND before.
I think it's time to get one, so I thought I'd give it a try.
I bought the one from DAYTONA.
The texture and feel are not as good as J-TRIP's, but
I think it can be used for daily maintenance without any problem.View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING