36.21 HKD
(700 日元)
31.81 HKD
(615 日元)
(
12% 折扣
)
4 (28 評論)
Excellent
ConvenientI bought this to bleed air out of my Brake. It is more efficient because it is easier to suck air to bleed air.
The work can be completed with the included items, which is very helpful.
Reviews For ACTIVE 放空氣用 針筒 (Type-2) From Other Webike User
Very Good
Cost-effective brake fluidMaintenance productsIt's Syringe and Hose as you can see.
It is very useful when you put Brake fluid.
If you want to change the fluid, you don't have to use this kind of items because the air doesn't bite in the first place, but if you want to change the fluid in CaliperOH, you can use this.
Special tools for easier use (Brake Breeder) There is certainly, but because even a cheap thing costs several thousand yen, it becomes a painful expense for the Sun Machine which is not so much as an opportunity to put in Brake fluid from 1.
In this point, I think that the cost performance is good even if it buys it in the disposable sense because change comes in 1000 yen if it is this product.
If you are going to use the Hose many times, you can buy a cut of the appropriate Oil Resistant Hose at the Home center.
The drawback is that the end of the Syringe is a little weak.
Be careful not to try to forcibly insert or remove the Hose, as it may break from the root.
I think this is a good product to buy as a first step for maintenance to handle brake fluid.
However, BrakeMaintenance is directly related to safety, and it is not”large and strong” as long as this is the case, so if you are not familiar with it, you should have someone who is familiar with it attend and perform it.View Detail
Average
Easier air removalAlthough it is Air which sometimes hardly comes out once it fits, once you exchange Fluids with this product, it takes less time and air bleeding has become easier. If it is short, Oil Resistant Hose is set to 1 Meter, unnecessary part is Cut. It is also aligned even at 100 and the home center, so it is difficult to think that it is somewhat expensive or not.View Detail
Poor
Pump and Hose need more time!The essential Pump and Oil Resistant Hose are removed during work. Since it does not become a thing if it is as it is, I fixed the joint with liquid packing. Pump is made by medical NIPRO, but it is not compatible with Oil Resistant Hose.
Well ~ Motorcycle related Parts are generally useless unless you add your own hands!View Detail
Average
It is necessary for SEA BASSOEMbrembo.GSX1300R HAYABUSA Front's OEMbrembo has a Breeder without Fluid inside. Of course, you can not work unless Caliper is removed. Although Caliper can dangle dangle, you can shake Brake lever, but it is difficult to tighten and loosen Breeder with Brake operation and Timing together.
So I did not use Kore.. I pulled Piston while releasing a little bit of Breeder but I felt bubbles appearing as humpy in Hose but it seems that outside air did not come out of Caliper but outside air enters through a slight gap between Hose and Caliper. Air will not blow at all after bleeding in a normal way later.
Once I use it I can not go back to normal.
Rear brake and Clutch were able to use this product.
Oh yes, there is a Joint part at the tip of the syringe and you can freely remove Hose from the syringe Body. It is very useful, but even if you can remove Body and Joint, you can disconnect Joint from Hose. I want you to put it in the spare. I could use Hose longer and shorter, long for Caliper, short one for Brake lever side TankView Detail
Most Viewed Reviews Of ACTIVE Other Motorcycle Specialized Tools
Excellent
Very goodI used this for CaliperOH on my ninja250. It was my first Caliper OH, but thanks to this I was able to do it properly.
It was surprisingly easy to remove the air. Recommendation.View Detail
Very Good
BrakeMaintenance is a must for Items.[How is it used?
I use it for daily maintenance around the brake. It is mainly used around the brake of XJR1300C and YZF-R25.
Was the one you received as per Image?
Just as shown in the Image. The feel and texture was the same as before. In fact, this is the second time I have purchased this product.
After all, since we are dealing with Fluid, if the maintenance of the tools after use is neglected, they will become brittle because they are plastic.
I thought I had used it carefully, but the tip of the Syringe broke off due to Fluid and deterioration from use, and this is the second one.
How was your experience with it?
As I said, it is easy to use. Since I often work alone, I recommend this most Large capacity Syringe.
I have another one for 30ml, but this one is Large because the amount that can be sucked out and pumped in is too high.
Large doubles as Small. Right.
[Points to note]
As mentioned earlier, it is still Material:Plastic product. It will hurt if you don't make it Beauty after use.
If the Fluid is left sticky, it will crack, and if it remains attached to Memory, Memory will disappear.
On the other hand, cleaning with Parts cleaner is also not recommended as it gives Damage.
Fluid dissolves well in water, so wash with water after use and dry before putting away.
The point when you put it away is to apply a thin coat of metal rubber to the rubber parts of the Syringe when you use it next time.
This is a highly recommended Small technique because it can be used for Smooth.View Detail
Average
You can have them individually, if you want.You can have individual syringes and Tubes, but Quantity:It is a set, so there is no need for hassle.
Also, the Joint that connects the syringe and Hose is also a Quantity:It's very convenient because it's a set.
When removing the syringe from the hose, it is a little difficult to remove due to friction if there is no Joint.
The Joint makes it easy to remove.
You can pull out old Fluid that is fully Tan in the syringe without any hassle.View Detail
Very Good
It'll make your work go faster.I bought this for bleeding air when replacing the brake hose on my GSX-R125. I can bleed the air without it, but it makes the work faster.
If you are working alone, you may find it easier to use a longer Hose.View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING