78.49 HKD
(1,518 日元)
71.66 HKD
(1,386 日元)
(
9% 折扣
)
4 (3 評論)
rating breakdown
5 Stars |
|
1 |
4 Stars |
|
0 |
3 Stars |
|
0 |
2 Stars |
|
0 |
1 Stars |
|
0 |
Excellent
Used with Fender Eliminated KSR80I bought this product because the KSR80 I bought used was Fender Eliminator, but it did not have Reflector.
You can install it between the License Plate and the Bracket without any problem even if you are a beginner.
The price is right for Universal and the quality is a bargain.
Most Viewed Reviews Of Rin Parts Reflectors
Average
It's for ZOOMERI found in the Package that it is for ZOOMER, so it should be able to be attached to ZOOMER
It's hard to tell the difference between Brake and Position
I couldn't pimp a motorcycle that I wanted to put on, so I left it there as a hassle It isView Detail
Very Good
Mounting on XG250 TRICKER.Go out to the night forest road etc etc etc. , Because it rides at night often, I installed it as an additional Stop lamp because it is unbearable at OEM's Small Tail lamp. I added the hole for Wiring with the same Size as the OEM Reflector and the same mounting hole diameter, and it was attached without feeling of back-end attachment.
Lights on the Stop lamp side can ensure sufficient visibility. Will not it function as a reflector?.
Lens margin etc., making is not so good, but the price is also cheap enough enough. We installed waterproof with clay in the hole where Wiring is going out.
I think that I want to Repeat if it gets broken again.View Detail
Excellent
Rin Parts Rin Parts Square Type LED ReflectorI was looking for Tale lamp for expansion of Motorcycle variously with Net, Motorcycle parts Shop, etc., but after all I decided to purchase and install this RinParts Rin PartsSquare Type LED Reflector which I sold at Webike after all.
Motorcycle In front of it, Daylight and Blinker are lit up as Position Lamps, which is a reasonable self Appeal power, but behind Motorcycle, the tail Stop lamp is Position lamp and the Appeal force behind is too weak is.
This RinParts Rin PartsSquare Type LED Reflector Material : Quantity on Aluminum Base : Pair (for Left and Right) Quantity : 2pc. Set installed, I decided to install its Base on Rear Carrier of Motorcycle and increase the Appeal power to the rear.
In order to suppress solder peeling of the foundation by any chance due to vibration and overheating, rectify Diode (1000V1A) 1 pc. (Separately purchased 1 pc. \ 15) I put it in Wiring, but the top of the photo shows the Stop lamp lit - The bottom of the photo shows the Tale lamp lit. Especially no problem has been raised in the decrease of the light quantity and Appeal force behind.
Such a Lamp which had been installed before was supposed to be attached with the dimension to be refrained, but it was broken by a bump at the convex part of the fallen road surface and it was disconnected.
In anticipation of this, this time it is more Quantity than the previous Base width : Pair (for Left and Right) I made the dimension of 25 mm shorter, so that I did not destroy it the same way even if I overturned.
This RinParts Rin PartsSquare Type LED Reflector is a very inexpensive product, but since it is one time to replace it if it breaks it is not broken and there is nothing better to break.
This RinParts Rin PartsSquare Type LED Reflector is cheap so I am Quantity : 2pc. Set is used.
Moreover, because it seems there is no durability low because it is inexpensive, I use this RinParts Rin PartsSquare Type LED Reflector with confidence.
Installation of this RinParts Rin PartsSquare Type LED Reflector to the base part is also not difficult, it is not difficult, and although there are 3 wires, it can easily connect to a for BrakeWiring of the Motorcycle Body with the plug terminal etc. It is easy to install I think that it will belong to the category.
I attached this RinParts Rin PartsSquare Type LED Reflector and confirmed the lighting many times at night, but the Tale lamp looked like it looks like an OEM Product in the dark.
.View Detail
Excellent
Rin Parts Rin Parts Square Type LED Reflector【What made you decide the purchase?】
When extending Rear Carrier exclusively for Long touring, OEMTail lamp became hard to see, so we added a round Tail lamp.
Since the mounting base was overhanging too much and broke the round Tail lamp at the time of falling, improve this time to make the overhang small and look for a cheap and easy Tail lamp in a shape other than a circle If so, I found this RinPartsSquare Type LED Reflector.
【How was it actually used?】
Immediately, I tried installing.
Although there is concern about solder attachment peeling due to vibration, for now it plays a role well in tune.
At this price, Reflector - Tail lamp - It is surprising fact that there are three functions of Stop lamp.
【Mounting was difficult?】
Material for installation : Since we used Aluminum Base, it was easy to process and the installation was Smooth.
【Please tell me the installation point and hang】
On the core of the Reverse side of this RinPartsSquare Type LED Reflector there is Φ 5 mm Bolt for mounting.
Wiring comes out three lines near one end.
And since convex for fixing Body is out near the other end, Material : A total of three holes are required in the Base of Aluminum.
Because we need holes of about Φ 5 mm each, here Φ 5. Make 3 holes in 5 mm holes in required locations.
0. Since we can afford a margin from mounting error by responding with 5 mm Large eyes hole, we will be able to install properly when we fix this RinPartsSquare Type LED Reflector.
Millimiri kitchenly and Φ 5. Although it may be processed 0 mm, it is highly likely that it will not be entered at once with experience because of experience.
If it is easy to install it in a short time, we recommend that it be mounted and processed with error margin.
[Is there anything I was disappointed about?]
As of now, it is Items which can satisfy Large about price, capacity and quality.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I do not want peeling by Solder attached by vibration.
I want you to last long.
【Have you compared items?】
It compared with RinParts Round LED Reflector.
Just because the shape was different, both price and price were the same, so this time I chose this rectangular shaped RinPartsSquare Type LED Reflector.
.View Detail
Excellent
RinParts Rin Parts Square Type LED Reflector【What made you decide the purchase?】
Previously, with the Round Type LED Reflector attached, it was broken and damaged, so this time I tried this rectangular Rin Parts Rin Parts Square Type LED Reflector.
The price was also cheap, so Body was thin, so it was a product that seemed easy to install so I decided on this.
【How was it actually used?】
It seems to match the mounting base, so it looks bad.
The Reflector ability, Position and Stop lamp LED emission quantity are also good.
【Mounting was difficult?】
I did not feel difficulty in particular, but I installed it after considering the mounting dimensions and Wiring dimensions a little.
【Please tell me the installation point and hang】
Because it is a special Stop-lamp auxiliary light, we installed it to make it stand out even a little.
Also, in order to attach this Rin Parts Rin Parts Square Type LED Reflector to the Base, you have to open three Φ 5 mm holes of Wiring hole, fixing hole and rotation prevention hole.
We measure the dimensions and mark it and drill, but first open the fixation hole in the middle and pass it once, then Quantity : Pair (for Left and Right) If you reconfirm the hole position of the hole and drill it, you can install less Gap.
[Is there anything I was disappointed about?]
I installed it, but it was too normal.. I do not feel any discomfort.
It is a good thing that there is no sense of incompatibility, but it is too ordinary and it got somewhat unsatisfactory.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I want this product if it has the same shape as Rin Parts Rin Parts Square Type LED Reflector and it can be used for Orange color Blinker.
【Have you compared items?】
I tried to compare with other companies' LED tail lamps, but I liked this Rin Parts Rin Parts Square Type LED Reflector at the lowest price.
[Others]
This Rin Parts Rin Parts Square Type LED Reflector is a very inexpensive product but it is a normal Tale lamp with a very Sharp feeling of elegance when trying to install it without any cheapness.
It has a lot of light at the time of light emission so it is very bright so it can be recognized very well, it is a perfect product as Tale lamp and Stop lamp.
.View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING