145.86 HKD
(2,821 日元)
4 (7 評論)
Very Good
It's heavy and doesn't need to be opened this much, but it's better than pushing it back in by hand.I don't have any more feedback than I can use for now.
Hmm.
At any rate, I turned it by hand and it moved Smoothly.
I wish the Blade section was a little thinner, but I guess it's just the price.
Reviews For MINIMOTO 煞車卡鉗撐開工具 From Other Webike User
Very Good
It's not 100 points, but it can be used.important item
[Was there anything that disappointed you?
It was also in the imprints of others, but as for motorcycle use, I think that it is a little Large and heavy.
Do you have any wishes or improvements you would like to make for the Manufacturer?
It will be much easier to use if you can make it a little more Compact.
If you just want to push the Piston into it, you don't need this much of a Stroke.
[Do you have any products to compare it to?
DAYTONA Caliper piston reverse tool
What made you decide to buy?
It's not something I use often, so the low price was the deciding factor.
How was your experience with it?
LargeIt is heavy, but not so heavy that it interferes with work.
On the contrary, it's an awesome well feeling and doesn't feel like it's going to break.
After all, it was said in the comment of another person that when the Guide is 1 pc, it twists when used, but I did not feel it for me.
The details seem to be rather well made.
Was the installation difficult?
(Ooooh!)
【Please tell me the installation point and hang】
(Ooooh!)
[Was the Instruction Manual easy to understand?
(No Construction Manual setting)
[Included Parts:were they on?
(Included Parts:No configuration
[Others]
The actual work is not so much affected, but the parallelism of the two arms that push the Piston in is not showing.
Even if this Tool is not present, it can work with the substitute, but because it can work smoothly without damaging Caliper, it is not loss to have it. Anyway, because it is a price below Gasoline full Tan.
Now I'm going to use it in Car.View Detail
Very Good
ConvenientUntil now Piston's return was returning with a pattern of Praghan. I have tried using it because it has quite a power that the return is bad.
I can easily return it like a lie. For Motorcycle, it is A little Large, but this can be used for cars.
In the case of 2 pots only Quantity : 2pc. The side which does not return unless you set it at the same time pops out..
It is convenient to have itView Detail
Average
Large.I feel Large to use for discCaliper in Motorcycle. I do not mean that I can not use it, so I think that it will be easier to use if you slightly reduce the size to Small overall.View Detail
Very Good
Brake massacreDisassembling Brake Compare and buy with Cost priority to do cleaning and rubbing, I am satisfied with the price. I think that the product is also solid and it is completely problematic in individual use.
I think that it would be nice if you want a bit lighter.View Detail
Excellent
Here as well! It's wonderful!★★★ - - - This time, himself ~ the first Brake Pads exchange! - - - For a little insecurity ~~~ (Lol) - - - I heard various things - I investigated ~ and also purchased here! - - - If you do it with your strength, I thought it was kind at all ~ Buy it with curiosity for the time being !!! - - - Wow! Here too Large - It was a useful commodity !!! It's working efficiency UP !!! Nahori ~ It is a special tool !!!
- - - Here too ~ Work is in the face White ~ crazy - - - There is no image. (Lol)View Detail
Most Viewed Reviews Of MINIMOTO Other Hand Tools
Very Good
It's not 100 points, but it can be used.important item
[Was there anything that disappointed you?
It was also in the imprints of others, but as for motorcycle use, I think that it is a little Large and heavy.
Do you have any wishes or improvements you would like to make for the Manufacturer?
It will be much easier to use if you can make it a little more Compact.
If you just want to push the Piston into it, you don't need this much of a Stroke.
[Do you have any products to compare it to?
DAYTONA Caliper piston reverse tool
What made you decide to buy?
It's not something I use often, so the low price was the deciding factor.
How was your experience with it?
LargeIt is heavy, but not so heavy that it interferes with work.
On the contrary, it's an awesome well feeling and doesn't feel like it's going to break.
After all, it was said in the comment of another person that when the Guide is 1 pc, it twists when used, but I did not feel it for me.
The details seem to be rather well made.
Was the installation difficult?
(Ooooh!)
【Please tell me the installation point and hang】
(Ooooh!)
[Was the Instruction Manual easy to understand?
(No Construction Manual setting)
[Included Parts:were they on?
(Included Parts:No configuration
[Others]
The actual work is not so much affected, but the parallelism of the two arms that push the Piston in is not showing.
Even if this Tool is not present, it can work with the substitute, but because it can work smoothly without damaging Caliper, it is not loss to have it. Anyway, because it is a price below Gasoline full Tan.
Now I'm going to use it in Car.View Detail
Very Good
ConvenientUntil now Piston's return was returning with a pattern of Praghan. I have tried using it because it has quite a power that the return is bad.
I can easily return it like a lie. For Motorcycle, it is A little Large, but this can be used for cars.
In the case of 2 pots only Quantity : 2pc. The side which does not return unless you set it at the same time pops out..
It is convenient to have itView Detail
Average
Large.I feel Large to use for discCaliper in Motorcycle. I do not mean that I can not use it, so I think that it will be easier to use if you slightly reduce the size to Small overall.View Detail
Very Good
Brake massacreDisassembling Brake Compare and buy with Cost priority to do cleaning and rubbing, I am satisfied with the price. I think that the product is also solid and it is completely problematic in individual use.
I think that it would be nice if you want a bit lighter.View Detail
Excellent
Here as well! It's wonderful!★★★ - - - This time, himself ~ the first Brake Pads exchange! - - - For a little insecurity ~~~ (Lol) - - - I heard various things - I investigated ~ and also purchased here! - - - If you do it with your strength, I thought it was kind at all ~ Buy it with curiosity for the time being !!! - - - Wow! Here too Large - It was a useful commodity !!! It's working efficiency UP !!! Nahori ~ It is a special tool !!!
- - - Here too ~ Work is in the face White ~ crazy - - - There is no image. (Lol)View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING