190.27 HKD
(3,680 日元)
4 (9 評論)
Average
I'm worried it's going to rattle.I bought this for the installation of a dedicated Navigation device, not for fixing the phone.
As for the Handlebar side installation, there is no problem at all.
Attachment installation with Strong Double-sided Tape on the body as described in the product description is also a little uneasy, but trusting the adhesion power of Tape, it is glued to the flat part of the BodyReverse side.
The problem is that the Bracket and the Body can be fixed by One-touch, but the rattling is large when NavigationBody is installed. There is no rattling in the plane direction, but there is a lot of rattling in the depth direction.
I installed it on BMW F 650CS, but because the engine is big single, the vibration around the handlebar is large, and I am worried about how this rattling will affect. Because I have not gone to touring after installing it yet, I cannot tell the situation which was used in reality, but I think that it would be better to use such as a thin Elastic band for auxiliary fixation.
The product itself can be attached to the Refreshing and the price is not too expensive, so it may be good for motorcycles with less vibration. I don't feel like using this product to fix a large mobile phone filled with expensive personal information and memories.
Reviews For OXFORD 【CLIQR】摩托車用把手安裝型轉接座 From Other Webike User
Excellent
That's what I got for my ZX-6R!What made you decide to buy?
I tried to use the RAM MOUNT XGrip that I use on the GROM with the ZX-6R, but unlike the GROM, the ZX-6R has a forward riding posture, so I felt uncomfortable with the cell phone in front of me while riding, and I thought it was hard to see the meter. I thought it was difficult to see the meter (I installed it on the KIJIMA Handlebar Mount Bracket). I bought an Oxford clicker and installed it.
How was your experience with it?
From the moment I saw the product introduction video of Oxford:Clicker on Webic. "This is it for my ZX-6R!" I thought it was a good idea...but it was a great decision to buy it. Attach the included adapter for the device to the phone case. After confirming the position to stick, degrease it. The adapter is a strong 3M specification, but it is said that the fall prevention measure is necessary because there is a case that it comes off and falls by the difference of the adhesion condition and the adhesion environment etc. Stick the adapter to the mobile phone case and refrain from using it for 24 hours to make it stick firmly. After that, I attached the dual click system to the Kijima handlebar mount stay using the included silicon for adjustment, checked the carrying position and angle, and then tightened the system. It is important to have the position where you can easily insert and remove the key and the angle where you can watch the navigation without shifting your eyes. By the way, it's also good that you can easily change the cell phone to vertical or horizontal orientation!
Oxford:The clicker is more refreshing than the RAM MOUNT XGrip, and the meter is easy to read. Also, since 7 kinds of OptionMount are prepared including the mount of ActionCamera, it seems to be able to play an active part in every scene with high universality.View Detail
Excellent
Tightly and to Click.[How is it used?
In use.
Was the one you received as per Image?
The thing is well made!
It is easy to install and to clamp.
Two Adapters of Universal to attach to Smartphone Case side were included.
You can use it as a spare, or if you have trouble and want to remove it.
How was your experience with it?
I'm not sure if it's because I'm not used to it yet, but I haven't been able to remove the Ka Chica Chi as well as I thought I would.
I wonder if I'll ever get there...
[Points to note]
The part that clamps the Handlebar is a little thicker to ensure minimum strength.
The size of the handlebar on the PCX125 was not a problem, but it did not have clearance and could not be installed.
For the PCX125 I purchased an additional Multi Mount Bar.
https://www.webike.net/sd/23121609/
The VFR800X could not be fitted because the diameter of the Handlebar did not match the VFR800X.
It is necessary to purchase the Mount bar of Type that extends from Mirror etc. separately.
https://www.webike.net/sd/23453838/
How did it compare to other products?
As for the type of phone mount that can be easily detached with the Adapter on the phone side, MotoBundle of SP Conecto and Quad Lock were candidates.
If there was Case etc. which conformed to my smartphone which I am using now, I probably made it that way, but because unfortunately there was no Case of Expos for Rear, I chose comparatively cheap Universal-like Clicker.
Wireless charging type Smartphones have been increasing recently.
The part where Universal's Adapter is attached may interfere with Wireless charging.
My phone is exactly like that, but it may be a bit inconvenient for daily use, as you won't be able to use fingerprint authentication with the Case on.
View Detail
Poor
Be careful with single cylinders.Things are very nice
It can be installed by anyone because it only requires one screw and adhesive tape.
I used it for about 400 km on Touring, and it was fine at that time.
The phone never fell off.
I was satisfied.
I don't know if it was originally 4 screws that came loose due to vibration or not, but one screw was missing.
My Motorcycle has a single cylinder and a lot of vibration!
Maybe that's why it came off, but I'm a little disappointed.
If you have a single cylinder, off-road car, or a hardened foot, I recommend that you start with Rose and apply Screw lock.
I'd give it a perfect score if it wasn't for the fact that Screw went pointy.View Detail
Average
Anxiety about fixingWhen I couldn't fix the Handlebar completely, it broke when I tightened it up. It's better to prepare for your own rubber tuber etc.! It's easy to get stuck in and crack because the fixation points are made of resin! I've managed to take it apart and get it to work, but it's very easy to use!View Detail
Average
I think it's a good product.I don't want to extravagant around the Handlebar, so I found this product with its simple configuration to be very good.
However, this is my mistake, but this product is compatible with the Handlebar size:22mm and is not compatible with the Taper Handlebar.
If you want to wear it on the thicker part of the Taper Handlebar, you can use "Handlebar Mounting. I think it would be better to buy Type.
As a result of I did this and that to try to attach it to the thin place as much as possible, I Mount side was broken. It will be out of warranty, and it is a storehouse as it is.
It's cheaper than QuadLock and I think it's a good one to try and see.
View Detail
Most Viewed Reviews Of OXFORD Smart Phone Holder / Mount
Excellent
That's what I got for my ZX-6R!What made you decide to buy?
I tried to use the RAM MOUNT XGrip that I use on the GROM with the ZX-6R, but unlike the GROM, the ZX-6R has a forward riding posture, so I felt uncomfortable with the cell phone in front of me while riding, and I thought it was hard to see the meter. I thought it was difficult to see the meter (I installed it on the KIJIMA Handlebar Mount Bracket). I bought an Oxford clicker and installed it.
How was your experience with it?
From the moment I saw the product introduction video of Oxford:Clicker on Webic. "This is it for my ZX-6R!" I thought it was a good idea...but it was a great decision to buy it. Attach the included adapter for the device to the phone case. After confirming the position to stick, degrease it. The adapter is a strong 3M specification, but it is said that the fall prevention measure is necessary because there is a case that it comes off and falls by the difference of the adhesion condition and the adhesion environment etc. Stick the adapter to the mobile phone case and refrain from using it for 24 hours to make it stick firmly. After that, I attached the dual click system to the Kijima handlebar mount stay using the included silicon for adjustment, checked the carrying position and angle, and then tightened the system. It is important to have the position where you can easily insert and remove the key and the angle where you can watch the navigation without shifting your eyes. By the way, it's also good that you can easily change the cell phone to vertical or horizontal orientation!
Oxford:The clicker is more refreshing than the RAM MOUNT XGrip, and the meter is easy to read. Also, since 7 kinds of OptionMount are prepared including the mount of ActionCamera, it seems to be able to play an active part in every scene with high universality.View Detail
Very Good
Spec. changeI was using a clicker for Motorcycle, so I thought it would be convenient to use the same Case.
As for installation, I was able to install it by pushing it in to the extent that Air-conditionerBent was not broken. Because I think that there is a case that it doesn't fit, it is necessary to consider it carefully.
I'm very pleased with the quality and the fact that the clip is tight and there are two of them, so I'm not worried about it rattling.
Note that the position of Lever to lock the Case in Spec. change is different from the Image image because it has become vertical from the horizontal orientation. I think that it is not a problem if you get used to using it.
For the following inquiries
I spent an inconvenient day without using it because I was planning to return it and I hadn't heard anything for almost a month;
I don't know if it's the slowness of Webig or the slowness of the Manufacturer, but if they claim to be able to respond in an average of 5-7 business days, I would have liked to at least be informed of the progress.View Detail
Excellent
Tightly and to Click.[How is it used?
In use.
Was the one you received as per Image?
The thing is well made!
It is easy to install and to clamp.
Two Adapters of Universal to attach to Smartphone Case side were included.
You can use it as a spare, or if you have trouble and want to remove it.
How was your experience with it?
I'm not sure if it's because I'm not used to it yet, but I haven't been able to remove the Ka Chica Chi as well as I thought I would.
I wonder if I'll ever get there...
[Points to note]
The part that clamps the Handlebar is a little thicker to ensure minimum strength.
The size of the handlebar on the PCX125 was not a problem, but it did not have clearance and could not be installed.
For the PCX125 I purchased an additional Multi Mount Bar.
https://www.webike.net/sd/23121609/
The VFR800X could not be fitted because the diameter of the Handlebar did not match the VFR800X.
It is necessary to purchase the Mount bar of Type that extends from Mirror etc. separately.
https://www.webike.net/sd/23453838/
How did it compare to other products?
As for the type of phone mount that can be easily detached with the Adapter on the phone side, MotoBundle of SP Conecto and Quad Lock were candidates.
If there was Case etc. which conformed to my smartphone which I am using now, I probably made it that way, but because unfortunately there was no Case of Expos for Rear, I chose comparatively cheap Universal-like Clicker.
Wireless charging type Smartphones have been increasing recently.
The part where Universal's Adapter is attached may interfere with Wireless charging.
My phone is exactly like that, but it may be a bit inconvenient for daily use, as you won't be able to use fingerprint authentication with the Case on.
View Detail
Poor
Be careful with single cylinders.Things are very nice
It can be installed by anyone because it only requires one screw and adhesive tape.
I used it for about 400 km on Touring, and it was fine at that time.
The phone never fell off.
I was satisfied.
I don't know if it was originally 4 screws that came loose due to vibration or not, but one screw was missing.
My Motorcycle has a single cylinder and a lot of vibration!
Maybe that's why it came off, but I'm a little disappointed.
If you have a single cylinder, off-road car, or a hardened foot, I recommend that you start with Rose and apply Screw lock.
I'd give it a perfect score if it wasn't for the fact that Screw went pointy.View Detail
Average
Anxiety about fixingWhen I couldn't fix the Handlebar completely, it broke when I tightened it up. It's better to prepare for your own rubber tuber etc.! It's easy to get stuck in and crack because the fixation points are made of resin! I've managed to take it apart and get it to work, but it's very easy to use!View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING