Tire replacement about 10 times a year (including reverse footwear) For those who want to do the same thing, the Teigumi Goods are a necessity Although the price is expensive, from 12-inches to 17in.180Size this one is enough
Quality and ease of use
Just like their maintenance stand, it's sturdy and easy to use, and once you buy it, it will last for years That's right Even 12-inchesTire, which is said to be a tough one, can be given a push to match the Rim's edge Bead drops
The wheel of the double disk is distorted when used as it is, because the disc hits the ground So I use it by putting a piece of wood or scrap Tire underneath to gain height
Cost performance
i bought it at the time of sale at webike's and sold it for around 13,000 yen, if it was a Tire Lever or Even if you buy it at the same time as Bead cream, it's around 15,000 yen
Even if you bring in your own wheels for a cheaper price of about 1,500 yen per wheel, you can still get 10 wheels You can replace the Tire and you'll get your money back
If you are about to make a move, it's not a bad idea to buy it as an initial investment
I bought it because I am replacing the Tire myself.
Tube tires are fine without the Bead Breaker.
Tubeless is sometimes hard, so these tools are a relief.
The construction is very good and sturdy.
It is fully functional and Bead drop is easy.
It will last a long time, so it may seem a little expensive when you buy it, but it's not.
I think the cospa is not bad.View Detail
I was able to drop the Bead firmly in the target area
It was easier to drop than the Bead Breaker I've used in the past
The price seemed high, but it's great for function and not something that will break, so use it a lot! The resultant cost performance is also good, depending onView Detail
【What made you decide the purchase?】
? Tire width up to 200 mm. The fact that the product is secure with J-TRIPBrand (I also use MaintenanceSTAND. )
【How was it actually used?】
? As expected it is a structure that pushes close to Bead at a good angle either because it is a special item, so Bead fell easily.
【Was it difficult to install? (Hard parts case)】
? Parts are sold in a disassembled state, but the number of Parts is also small, so it was assembled just by seeing it.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Bolt does not work if it is tightened too much, and if it is too loose, the overall stiffness feeling will drop, so finding the best point.
[Is there anything I was disappointed about?]
? When the Disc Rotor of Front is set to the bottom side, Disc Rotor hits the pedestal. I let go with the wood in Garage so that Rotor does not touch.
【Hope for Manufacturer ? Please let me know if there are any improvement points]
? There was absolutely no notes etc such as hits on the Disc Rotor above. I think that you should bundle jigs that you can use with adding notes or with Disc Rotor attached.
【Have you compared items?】
? Compared with the inexpensive Bead Breaker sold at other mail order sites, but I purchased this item with Webike because it can be used with a wide Tire width, because it is a trusted J - TRIPBrand.
[Others]
? It is Beauty painting of White and Polished, but it seems dirty as you use it. But I like it..
View Detail
Tube tire of off-road motorcycle had been exchanged oneself many times, but this time was the first challenge for Tire exchange of Liter machine. It was the reason why I asked for it at a local shop because it was rather expensive, but with this product it was easiest to drop the Bead in 1 or 2 minutes. Off Unlike cars I do not have to worry about biting Tube with Tire Lever, so if you can even drop a bead
Exchange is completed in about 30 minutes. Tire was DUNLOP α - 13, but since it was purchased cheaply by webike, even if we added the tool cost of J - TRIP 's Breaker and Balancer, it was cheaper than asking Shop. You do not have to remove the Brake disc, nor do you have a storage place. I think that I use it only once a year, but I think that I should have bought it sooner.View Detail
If you purchase Bead Breaker, we decided to make it J-TRIP from the beginning!
Since the imagination was able to be imagined from the Maintenace Stand which I used before from the strength and the quality etc. of the product, there was no hesitation.
Until now, I asked Shop to use Mechanical Bead Breaker and worked with Tire Lever, but it was ON or OFF in Mechanical and it was Large strange because it became power skill in Tire Lever.
Because J-TRIPBead Breaker is a manual type, it is good to be able to do it easily in order to fine-tune the positioning, adjust the force, and decide the position that can be satisfied!
The feeling of use is very easy, "Sakutsu do not need force easily" You can drop the bead with, "What was your hard work?" I feel so impressed as I think!
Tire The efficiency of recombination work has been dramatically upgraded!
Also one Garage (It is called a secret base from a friend) Items joined, PRO seems to be? Fun doubling!
You can easily assemble the Bead Breaker with 6 mm and 5 mm Hexagonal Wrench, 13 mm Double-end Wrench. There is no special hang.
BodySize when assembled, total length 72. 5 cm X total height 36 cm X full width 22. 5cm is.
Arm's Length is 65 cm, Length of the LINK installing the Blade is upper 9. 5 cm on the lower side, 14 cm on the lower side, the Blade Length is 26 cm, the width of the Blade above Shovel is 12. It is 6 cm, the tip is 7 cm.
The member is Steel, the rectangular material whose vertical part is 4 cm × 2 cm, T part is 2 cm × 2 cm is used.
The pedestal on which the Tire is to be placed has a square of square material on it, and a Rubber for anti-slip and scratch protection is attached on it. The height of the stacked members is 2 cm + 2 from the bottom. 5 cm + 1 cm, the overall height is 5. 5cm. The area of ??Rubber is secured enough area with width 4 cm X Length 15 cm X thickness 1 cm.
As you can see in the description of the item, you can work without removing the Brake disc, but it seems better to secure enough clearance and stability, such as by using appropriate wooden square material.
Moreover, in order to prevent further damage of Wheel, it is perfect if you do some curing at the tip of the Blade or cover the Wheel with a suitable Size cloth.
For people who are exchanged for Tire exchange with DIY, it is a must-have Items item.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING