37.95 HKD
(734 日元)
36.4 HKD
(704 日元)
(
4% 折扣
)
4 (7 評論)
Poor
What is bremboRCSMASTER?Purchased with Koken MechanicalClutchL 29 HolderLever.
Lever Koken AeroShort ,, Half lever well forgive.
In the vicinity of Lever pivot, it was unmarked in photos, but bremboMark
Instead, proudly
"Koken" Including letters ,,
What's wrong with RCSSeal, installing, thinking
"I feel a sense of grasshopper sensation despite what I am suffering somehow ,,
Do not be excessive. " (o'Д`o) ノ゙
Reviews For KOHKEN (KOHKEN DENKA) RCS 橡皮塞&貼紙 From Other Webike User
Excellent
Koken Clutch holder essentialsI used only this Sticker because I changed the Clutch Side to Koken's Clutch holder to match the bremboRCSMASTER on the Brake Side.
The original Koken Clutch holder has an indentation for attaching the Sticker, so it can be attached easily.
I am very satisfied with this product because I can combine it with Brake.
I haven't used the Cap, but it is the same etc. as OEM, so it can be a spare part for Brake Side.View Detail
Very Good
I purchased it because I replaced it with Lever outside the company from StandardLever of RCSMASTER【What made you decide the purchase?】
Since I replaced it with StandardLever of brembo's RCSMaster cylinder to Cut-outLever of antlion, Sticker of ItalianColor symbolizing brembo's Master cylinder has gone.
I tried to look it up and found out that it was out as Repair Parts so I bought it.
【How was it actually used?】
Unlike StandardLever, Lever of antlion has no place to accommodate the Sticker, so if you go closer and look closely well you will find that you have a feeling of retrofitting, but you were able to paste StandardLever into your model well.
I am satisfied with the natural finish so that it seems to be StandardLever? Of brembo from a distance.
For me personally, without this Sticker, I do not get a satisfaction feeling that I own brembo, so I think that I bought the price though I put it.
【Mounting was difficult?】
It is easy to install because it is only the BlindRubber of the hole part for Sticker and Ratio adjustment.
Sticker is Small so I think that if you have Tweezers or something you can avoid the tragedy that gets dirty on the sticky side by dropping it. Also do not forget to degrease the place to paste.
Blind's Rubber says nothing like hang, but for the time being, I think that if you push a part of the outer circumference and turn it with your fingers GRU RI and your fingers, it will fit in arbitrary.
【Please tell me the installation point and hang】
Same as above
[Is there anything I was disappointed about?]
There is no dissatisfaction with quality by saying bremboOEM of security, but it is actually a little expensive to be over 600 yen to Sticker and Blind's Rubber.
In my case, if only Sticker was available, Blind's Rubber could be ported from StandardLever, so I wanted Sticker and Blind's Rubber to be sold separately if possible.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Same as above
【Have you compared items?】
None
[Others]
Although standing for nearly six months after pasting, it seems that it adheres well to the face of Cut - out, so it will not come off.
I wrote that the price is high, but just thinking that the price is high for the content, the Gold amount itself has never been Large, so if it seems to deteriorate and come off, I will try to Repeat again.View Detail
Very Good
Parts of commitmentI bought a spare of SelectorCover of Radial master.
Degradation of resin parts is quick, so if there is spare there is no reason to not wait for arrangements.
After all, Brembo master's satisfaction is high, but I think that the satisfaction of appearance is also Large thing.View Detail
Most Viewed Reviews Of KOHKEN (KOHKEN DENKA) Stickers / Decals
Excellent
Koken Clutch holder essentialsI used only this Sticker because I changed the Clutch Side to Koken's Clutch holder to match the bremboRCSMASTER on the Brake Side.
The original Koken Clutch holder has an indentation for attaching the Sticker, so it can be attached easily.
I am very satisfied with this product because I can combine it with Brake.
I haven't used the Cap, but it is the same etc. as OEM, so it can be a spare part for Brake Side.View Detail
Very Good
I purchased it because I replaced it with Lever outside the company from StandardLever of RCSMASTER【What made you decide the purchase?】
Since I replaced it with StandardLever of brembo's RCSMaster cylinder to Cut-outLever of antlion, Sticker of ItalianColor symbolizing brembo's Master cylinder has gone.
I tried to look it up and found out that it was out as Repair Parts so I bought it.
【How was it actually used?】
Unlike StandardLever, Lever of antlion has no place to accommodate the Sticker, so if you go closer and look closely well you will find that you have a feeling of retrofitting, but you were able to paste StandardLever into your model well.
I am satisfied with the natural finish so that it seems to be StandardLever? Of brembo from a distance.
For me personally, without this Sticker, I do not get a satisfaction feeling that I own brembo, so I think that I bought the price though I put it.
【Mounting was difficult?】
It is easy to install because it is only the BlindRubber of the hole part for Sticker and Ratio adjustment.
Sticker is Small so I think that if you have Tweezers or something you can avoid the tragedy that gets dirty on the sticky side by dropping it. Also do not forget to degrease the place to paste.
Blind's Rubber says nothing like hang, but for the time being, I think that if you push a part of the outer circumference and turn it with your fingers GRU RI and your fingers, it will fit in arbitrary.
【Please tell me the installation point and hang】
Same as above
[Is there anything I was disappointed about?]
There is no dissatisfaction with quality by saying bremboOEM of security, but it is actually a little expensive to be over 600 yen to Sticker and Blind's Rubber.
In my case, if only Sticker was available, Blind's Rubber could be ported from StandardLever, so I wanted Sticker and Blind's Rubber to be sold separately if possible.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Same as above
【Have you compared items?】
None
[Others]
Although standing for nearly six months after pasting, it seems that it adheres well to the face of Cut - out, so it will not come off.
I wrote that the price is high, but just thinking that the price is high for the content, the Gold amount itself has never been Large, so if it seems to deteriorate and come off, I will try to Repeat again.View Detail
Very Good
Parts of commitmentI bought a spare of SelectorCover of Radial master.
Degradation of resin parts is quick, so if there is spare there is no reason to not wait for arrangements.
After all, Brembo master's satisfaction is high, but I think that the satisfaction of appearance is also Large thing.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING