31.59 HKD
(611 日元)
4 (3 評論)
Very Good
It is surprisingly easy to useI just bought it because the 14 mm Socket got useless. SIGNET 's Wrench is 10 years long even if it is used for a while, so I use it as a tool for Main as it is durable.
I needed enough for this Socket.
Reviews For SIGNET 3/8DR 長套筒 14mm From Other Webike User
Very Good
Although there is no scene which needs a deep socket not much and most was able to work with extended Bar and glasses to the usual socket by motorcycle,
Although a sensor hits with a standard socket, and it does not enter, it cannot access from an engiAlthough there is no scene which needs a deep socket not much and most was able to work with extended Bar and glasses to the usual socket by motorcycle,
Although a sensor hits with a standard socket, and it does not enter, it cannot access from an engine guard's opening with glasses but the oil is changed since the drain bolt with a sensor was attached,
One by one, the engine guard had to be demounted, and since it was troublesome, it decided to buy a deep socket.
However, since it was a tool of only a drain bolt, since the deep socket of the signet was cheap, it bought it with the cheapest possible thing.
It is cheaper than the standard socket of KTC.
Although the price is cheap, the surface is mirror finish, and its appearance is also beautiful and it thinks that the processing accuracy of the plug by the side of a bolt and a joint is also satisfactory.
As for the receptacle of a bolt, naturally, power is applied to the neighborhood [ not the tip of the angle of a bolt but ] side in the sixth page.
Although the hole which misses a sensor cord in my case has been made in a side face, since reinforcement is satisfactory, by anticipated use, I still think that there is no problem.
However, frequency in use uses only a years time only by oil change.
Since I think that cost performance is high, especially in a direction without a prejudice, I think that this price is recommended to a tool.View Detail
Most Viewed Reviews Of SIGNET 3/8 in. Metric Sockets
Excellent
Because I was pressed for itIn installing the cone of Frame slider, purchase as countermeasure to entering the place where Cap bolt of M10 retreated. Because it is such a limited use, I was grateful that I got it cheaply there. Usually it's 4 to 6 mm and it's enough. I also bought it together with other small items that also serves as shipping fee adjustment.
I think whether strength is enough, too. It can be used without problems especially within the prescribed Torque. The finishing of Plating is also beautiful, and it is more than the price in terms of texture.View Detail
Average
There is no turn number. - - - It is convenient to have. - - - It should have been!I bought a 14 mm Socket before.
At that time 1 / I think that the number of times of use will be more for the insertion of 4 1 / I bought the one of 4.
However - - - I do not have a turn.
I would like to use it in Torque wrench if I can replace the Oil Filter.
So this time another shopping is this 3 / Purchase a merchant with 8 inserts.
But I guess there will be few turnips - - -.
And what I remembered so far so far.
1 / 4 and 3 / I bought 8 Conversion Adapter, so this was not necessary.
It was a hobby shopping.View Detail
Very Good
For retrospective BoltI bought it for removing Front fork's BottomBolt. If ordinary things are not enough to reach Length, we need to use Impact, so we made this product.
The feeling I used was absolutely no problem, I felt nice without licking it even if it was powerfully turned by Impact.
The price is also cheap, but it was better if it was cheaper for a while.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING