- Decision of purchase / Motivation
If you are wandering around, be sure to Grom to Dilts Japan : OPTopIndicator Hit on installation.
The user who is purchasing & used is often commented on "purchase price is cheap, voltage / Summer - You can manage oil temperature in winter! "Is the best purchase motive. It is also a Parts that raises Custom feeling further, since I saw that it was attached to second hand Grom at Honda DREAM shop where I purchased Grom "I want to add my own grommato one day!" I kept thinking, I finally reached today.
- Impression actually used
Dilts Japan to Grom : According to the comments of everyone installed OPTopIndicator, voltage management - I think that it was good to be able to check oil temperature control at a glance. Although it is time to install, it is the time when I installed it and the time of use became chilly with November, but if I run for 30 minutes the oil temperature will exceed 90-degrees. If this is the summer, it will be a lot of fun to see how much oil temperature will be, and it is also an Indicator that makes me think about oil temperature control in the summer. Dirts Japan : I would like to check the oil temperature of the four seasons making full use of OPTopIndicator.
- Ease of installation
In order to remove HeadCowl and Side cowl, you must also remove Rear cowl, so you can not work unless you remove all except RightSide cowl. Just when it gets cold, Plastic becomes hard, so in cold we have to work while paying attention to breakage of nails. Oil temperature Sensor just removes OEM and replaces. Complete the remaining OEMWiring and finish storing it in Waterproof Cover! And then we will go through Wiring to the Head section where Indicator is located. I bundle the extra Wiring at the Head part, but I cut the Handlebar all the way to Right and checked that the Wiring chewed on the other part and not forcibly pulled, it is a bundle and it is the end. The Attachment power supply supplies power to Body by biting the attached Wiring from Headlight section Relay - - - I supplied power in a different way. Why was the power supplied in a different way !!! When using the attached wire, you have to remove the Indicator power supply line every time you remove the Head part. Considering the future Maintenance, I found a Attachment power source from around the Meter using a simple Tester and secured it. Waterproof Connector is connected to power line with Both Sides and Indicator side of car. I did not go on with the ponding, but as I got involved, the finish is Large satisfied. (Please refer to the posted image) Head back, Meter back is clean and finished in OEM style.
I am very pleased with a purchase. It is a pleasure to install and to use it. Great design, great quality, everything is done very smart and accurate. Highly recommended item to any of grom / msx125 owners!View Detail
Great unit at a great price. Helps us air cooled guys keep track of our temps. Only bad part was the install instructions are in japanese. I'm still trying to figure out how to switch from celcuis to farenheit.View Detail
seller professinal, rapid service, parts is a picture of the site, parts very well packagedeasy parts install without no modification was carried outView Detail
In addition to Body, translation (Please enter here for Instruction Manual and Cable set for interrupt of car body Exclusive Design, so we have wire type machining, Wiring tool etc etc. There is no need for (OK if Grom's exterior is removed).
Basically installed in the Instruction Manual according to. The image of Instruction Manual is old Grom, but there is no particular problem, the position of Grounding Wire was the same.
Start with key On, it is a display of Blue color. The initial state is Celsius Display (* Fahrenheit display is also selectable).
A few seconds after startup (* Adjustable) After displaying the voltage, to the oil temperature display.
After that, each time you short press Mode switch, (Oil Temperature Gauge) → Maximum temperature → Voltmeter → Oil Temperature Gauge .......
Even when the key power is turned off, the display MODE seems to be memorized, so if you turn off the key with the highest Thermometer, from next time "OPEN Voltmeter Operation → Maximum Thermometer" It will be.View Detail
It looks good and it got the finished as expected.
Numbers are difficult to read during the day etc etc. Yes, I am satisfied with Large change.
Installation was also easy, but when you take power from the Blinker relay for LED
I get an error.
Those who have LED blinker installed, or have exchange schedule from now
It is recommended to prepare HM 090 type Waterproof Coupler in advance.
Grom is easily powered because Left Side has an Option power supply.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING