384.94 HKD
(7,445 日元)
3 (1 評論)
rating breakdown
5 Stars |
|
0 |
4 Stars |
|
0 |
3 Stars |
|
1 |
2 Stars |
|
0 |
1 Stars |
|
0 |
Average
There is a problem with the accuracy of the item【What made you decide the purchase?】
Because it was a bit cheaper than elsewhere.
【How was it actually used?】
I checked it with images in other places, but I'm a bit close to Left Side so the Right Side's Tire can not cover it.
【Was it difficult to install? (Hard parts case)】
Installation is difficult. Although it is also shown in the photograph, the hole through which Axle Shaft passes and the position of the hole of Bolt are Gap about 5 mm. I asked Manufacturer to confirm, but this production seems to be all the same with Gap. If processing is troublesome, you should not buy it.
【Please tell me the point of installation and hang (in the case of Hard parts)】
As Axle Shaft is removed and installed, at least for RearMaintenanceSTAND is mandatory.
Since we are pulling out Shaft, we finish Chain adjustment, provision of Nut Tightening at Torque and basic Maintenance essential.
If it is troublesome I will recommend to ask the store.
Expansion of the hole Large If you do not process it you may cost the labor if you do not do it.
I took several hours while checking Fitting with GoldFile and Bar File ...
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】Any
[Is there anything I was disappointed about?] Required
With Thailand Honda OEM's H2C, I did not have any doubt about accuracy etc, but the severity of Gap in the hole, Manufacturer's answer that it is all just the same kind of product, Why are you selling such things? ?is.
However, since the Headlight guard could be installed without problems, this Guard may be the right productive.
【Hope for Manufacturer - Please tell me if there are any improvement points
Please produce good new things a little more. If processing premise is less than half price is a reasonable price.
【Have you compared items?】
None
[Others]
I do not have movies on smartphone so I will put it here.
https : / / youtu. be / yKicZ1tO-Zo
Finally, Wae Big contacted Manufacturer and I got a lot of work done.
Mr. Wae Big told us that Manufacturer is Gap but only said that it is only a single point of normality with Manufacturer, but if it corresponds to returned goods returned Gold, we have already scraped and installed, so this time No returns.
Wae Big's response is ◎.
Most Viewed Reviews Of H2C Rear Fenders / Rear Huggers
Excellent
I find the design of this fender eliminator kit perfectAbout quality and texture, I can confirm that the quality is great and that the material used is ABS (Acrylonitrile Butadiene Styrene) plastic with a matte black finish and re-uses the original hardware for mounting. About the feeling of use, I find the design of this fender eliminator kit perfect, it tidies up the rear end of the Grom nicely and yet still provides a little protection from the rear wheel debris as it's sizing is not small like the majority of the other fender eliminators available. Products to buy together, I am not a fan of the original orange blinker lenses so a set of tinted blinkers lenses would be ideal to add to the cart to help clean up the look at the front and rear ends. Difficulty of installation, I can say the fitment of the fender eliminator kit was average due to the disassembly required to access the mounting points but the reuse of the original blinkers and number plate light saves any wiring changes. Cost performance and comparison with other products, The pricing of the product is great. You receive a nicely designed bracket that uses a durable material for a long life span. All the other options around use either stainless steel and aluminium and can suffer from cracking after a long period of time. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail
Excellent
디자인 적으로 훌륭처음에는 뭔지도 모르고 구매한 레진 스티커인데휀다 보호도 해준다고합니다.장착은 스티커 형식이라 초보자도 할수있을만큼 매우간편하고 미관상 이쁘고 가격이저렴해서 추천드립니다주변에서 물어 보는데 그냥 디자인적으로 이뻐서 붙였다고했네요ㅜView Detail
Excellent
Honda ct front fenderProduct is excellent quality, easy to install and looks great. It adds a sporty look to the front mud guard. Great outcome for little costView Detail
Average
No machining required, can not be installedIt is attached to ZOOMER-X, although installation may be easy if it is a NORMAL car ? ?
● Mounting Screw diameter did not match because Rear lowdownAdapter was worn
● Mounting Screw position is misaligned
When installing, the center of Tire and the center of Rear Fender do not match
● Because the Exhaust System is being replaced, you have to find Bracket on the Exhaust System side
Various processing is necessary
View Detail
Average
Included Parts when ordering : etc. Confirmation !!I ordered it on the site of the other person, but the accessories are slightly different.
The description of the part that seems to be the date of manufacture of Instruction Manual differs from the Instruction Manual in Site.
Bracket of Crank cover part is not attached and you have to make your own Bracket.
It was disappointing because I thought that it could be attached.
If you are planning to order from now on Included Parts : Please check well until.
View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING