775.56 HKD
(15,000 日元)
747.23 HKD
(14,452 日元)
(
4% 折扣
)
4 (2 評論)
Average
It is cheap, I wonder if I can measure Torque for the time beingI think that there is a more expensive and sophisticated Torque wrench, but since it can be measured to 1 pc up to 100 NM, I purchased it as it would be better to finish with 1 pc for normal maintenance.
Certainly 100NM is used only when exchanging Axle Shaft or Tire, so I think it would be better to introduce one pc separately and introduce something that can measure the Torque value normally used for servicing, but amateur use Considering the frequency, is not this sufficient.
I think that it is worrisome to mention that there is a backlash in the Dial of the Torque setting and the finish is cheap points, but I think that I was glad I bought it.
Reviews For SIGNET 3/8DR 扭力板手 10-100NM From Other Webike User
Very Good
The quality of maintenance is improved just by having 1 pcI didn't have my own torque wrench until now, so I had to borrow or pre-marker I used to tighten the bolts by marking them with a "mark" and so on Tire and Brake detachment are now done so that you can manage the torque at any time I bought it to
Torque wrenches range from a variety of tool manufacturers to a variety of torque Wrench is out, but for now 10-100NM I thought that I could cover a certain amount of torque management if this product was available Tools Set was prepared with SIGNET, and Brand which seems to be comparatively reliable The fact that it was much cheaper than other companies was also a deciding factor
A checklist of tolerances made by the Manufacturer is included with the product, and the product description It is a torque value within dirt & plusmn; 3% If it is this high accuracy, the cost performance is good enough
The item unlocks Blue at the base of the Grip and makes the Grip any Torque Just turn it like that There is a window at the top of the lock that shows the torque value, so it's easy to set up
The lower limit is measured from 10NM, but to be honest, you can set a more detailed torque value up to 20NM The torque wrenches that can do this seem to be more reliable Especially for Engine, which is a place where detailed torque management is required, not so much for I do not recommend it When tightening Caliper bolts and Axle nuts, which require more torque than this, we recommend This one pc seems to work fine If it is used in combination with a more detailed torque wrench, depending on the use, good maintenance will also progress I think
However, it is not easy to fit in the toolbox, because the Grip part is thick I keep it in the exclusive Case separately But for those who do maintenance on the road, such as Circuit, it's not a problem You may find it difficult to carry aroundView Detail
Most Viewed Reviews Of SIGNET Instrumentation Tools
Very Good
Good price and ease of use there.[How is it used?
I was originally using a Torque wrench made by SIGNET with a different measuring range, but I wanted to manage the smallest bolt of the Torque better, so I bought this Torque wrench.
Was the one you received as per Image?
The picture showed the same as the SIGNET Torque wrench I usually use, but when I saw the product I received, it was much smaller than I imagined;
How was your experience with it?
Since it is the same as the Torque wrench made by SIGNET that we had been using, the Torque settings and other ease-of-use did not change.
However, it is a little troublesome that the Socket cannot be replaced as it is, since it is usually 3/8 size. (Lol)
Prices are relatively low, but accuracy (%) The cosmetics are also moderately cost-effective because they are comparable to other companies' products at ±3.
[Points to note]
If you normally use 3/8Size, you will need a Conversion Adapter or 1/4 Socket because the Socket size is different.
How did it compare to other products?
NoneView Detail
Very Good
To manage the TorqueI use it to manage the torque on the important parts of the bolt. The drivetrain is especially severe, so I tighten the torque to prevent accidents, including wheel nuts.
It's luxurious and easy to use.View Detail
Excellent
I've always wanted oneI've been wanting one since I haven't had a MONKEY Wrench for a long time I don't know how to use it very well Of course it can be used as a normal wrench, but it is also useful for holding down parts and so on Yes
There were two types of LargeSmall from SIGNET, but this is the Small Smallest one It is I thought this one was probably more frequently used for Motorcycles Dial movement, no wobble in the chin part, and the quality feeling was excellent I would like to use it for a long time from nowView Detail
Very Good
The quality of maintenance is improved just by having 1 pcI didn't have my own torque wrench until now, so I had to borrow or pre-marker I used to tighten the bolts by marking them with a "mark" and so on Tire and Brake detachment are now done so that you can manage the torque at any time I bought it to
Torque wrenches range from a variety of tool manufacturers to a variety of torque Wrench is out, but for now 10-100NM I thought that I could cover a certain amount of torque management if this product was available Tools Set was prepared with SIGNET, and Brand which seems to be comparatively reliable The fact that it was much cheaper than other companies was also a deciding factor
A checklist of tolerances made by the Manufacturer is included with the product, and the product description It is a torque value within dirt & plusmn; 3% If it is this high accuracy, the cost performance is good enough
The item unlocks Blue at the base of the Grip and makes the Grip any Torque Just turn it like that There is a window at the top of the lock that shows the torque value, so it's easy to set up
The lower limit is measured from 10NM, but to be honest, you can set a more detailed torque value up to 20NM The torque wrenches that can do this seem to be more reliable Especially for Engine, which is a place where detailed torque management is required, not so much for I do not recommend it When tightening Caliper bolts and Axle nuts, which require more torque than this, we recommend This one pc seems to work fine If it is used in combination with a more detailed torque wrench, depending on the use, good maintenance will also progress I think
However, it is not easy to fit in the toolbox, because the Grip part is thick I keep it in the exclusive Case separately But for those who do maintenance on the road, such as Circuit, it's not a problem You may find it difficult to carry aroundView Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING