1,569.25 HKD
(30,337 日元)
1,496.83~ HKD
(28,937 日元)
(
5% 折扣
)
5 (1 評論)
rating breakdown
5 Stars |
|
1 |
4 Stars |
|
0 |
3 Stars |
|
0 |
2 Stars |
|
0 |
1 Stars |
|
0 |
Excellent
Position got easier and I do not care about vibration.【Mounting】
Since it is a form to exchange with Normal handle, it is easier and easier than the Top Bridge exchange type of HURRICANE's Pipe handle.
【Adjustment】
If you set the same drooping angle as Normal handle, it will be closer than NORMAL, but if you set Grip end slightly Up and set it to not hit Screen with Limit, the Handlebar will be close and it will be easier to ride further.
【Impressions】
Because it is NORMAL's Top Bridge, Rubber mount is comfortable suppressing vibration.
I like the finish of the surface is beautiful and I like it.
I use brembo 's Radial master, but it fits nicely without interfering with Cowl.
Large I am satisfied..
Handlebar Weight has the same weight as NORMAL, so I think Handling is unnecessarily stable.
Most Viewed Reviews Of EFFEX Handlebar Kits
Excellent
For an effortless position!The wires required for the ReplicaHandlebar of SR500 are listed in the Quantity:It's easy to choose the wire because it's set and you don't have to do anything The only thing I'd buy more of is Brake fluid!View Detail
Excellent
Classic look great!It looks like the Handlebar Up that was used in the initial model SR400 It's the same as the Type, so it's great for enhancing the retro feel
When I put it on and used it, there was a great difference even if the height of the Handlebar changed If it is a standard handlebar, I put my weight on the front and I can use it as a blinker, light switch I felt cramped to operate such things, but after changing to this Handlebar, there is room in the posture It was so much easier because I was able toView Detail
Very Good
The visible landscape changes only slightly - - -Just because the width and height change from OEMPosition, it is easier than this.
Due to just a bit of attitude and angle of gaze, it seems as if the scenery seen at Touring changed a bit. I wonder if this Position is not going to be wonderful in forest roads too!
Also, as an unexpected advantage, the Blinker switch operation while cutting Clutch was able to do without any difficulties because the weight on the arm ceased. This is appreciated!
I asked Shop for replacement work. Clutch Cable is a bit too long to touch Front fender (I will not touch it ...). FBrake hose improved to Touch with a little Snap in Swage line.
As the point of note the width and height of the car body will change so that at the vehicle inspection "Structural change" Procedure required.
Oh, of course "Structural change" It is done!View Detail
Excellent
Easy and easyI never had exchange of Cable or Brake hose, but I was worried about whether I could do it myself, but it is easier to lay than planning. Work finished without any problem.
I added this Hurricane's Set Back Holder to this Handlebar (Handlebar Post) I installed Cable length is OK.
Riding position is important. We are confident that Motorcycle will be even more enjoyable.
View Detail
Excellent
This is "Motorcycle feeling" What is it?NORMAL → WMHigh up continental handle → EFFEXEFFEX Replaced with EASY Rise Handlebar Kit Replica Handlebar Kit.
It is Replica of Wide, Up Handle of Initial Model SR 500. (Handlebar Weight is not included so I used the hand held)
Exchange is from wire to Brake hose, Length is delicately long so change the handling slightly to reduce load as much as possible.
The part corresponding to Meter Bracket and Frame and the position of Wire protection Tube are also slightly misaligned, and Tube alignment and Tube addition.
Brake hose became Mesh from Rubber, it was easy to exchange, but the position of the gold fixture fixed to the part of the Fender just above the Caliper does not match, and if it forces it, it seems that load will be applied to Caliper and Hose so lightly with Tie Wrap Fixed etc. - -
Take it off, think over and think over, Fitting all day long whole day - - There are parts that I still miss, but since it's my own car, it's worth spending time and I enjoyed it so I will not reduce stars.
Well, after having enjoyed by installing it scatteredly, after trying the test and fine tuning and going to the usual place - -
Extremely easy!
Initially Handlebar was more restricted than HI UPConti, so there was a sense of incompatibility, but the position where the hands are placed is exquisite.
You can leave it naturally, because no power comes in at all, I feel that Handling has become Natural more than ever.
Posture raising I think that the upper body has moved freely also is Large.
Sometimes I get hard when I give out Speed.
It is not a setting Ing to skip because it also feels difficult to open ahead from half of Axel due to squeezing Handlebar.
Lean - I feel good to get on with
Since Seat is NORMAL, it approaches the Motorcycle of the 70's together with Handlebar (Front 19 in. I think that.
When I got on it I feel like I'm spring because I helped, I feel relaxed at all.
This is the Motorcycle feeling that Stubai says - -
I used to have a relaxed and comfortable age in the past - -
I thought about it and I enjoyed it all day..
Is not it exactly in the present era of tiredness?View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING