93.27 HKD
(1,804 日元)
3 (5 評論)
Very Good
Chain exchange is doneI bought it by changing my own Chain.
The texture is not good but there was no problem with the motion.
Moreover, it can be used not only to remove Pin but also for press-fitting Plate after changing Chain
So that is a good tool for that point.
Reviews For MINIMOTO 打鏈器 #420、428、520、525、530 From Other Webike User
Excellent
cheapIt is not a high-end product, so this is sufficient unless you use it to do everything.
If you can't seem to get the Pin out when you pull it out.
You can use it after shaving it with a grinder and it is up to you to devise a way to use it.
It is useful if you have it.View Detail
Poor
It can break immediately with the first timeThere was a set of Body and a substitute Pick.
First turn turn Screw before Chain cut and you see that Pick is bent.
Since I can not use it, I tried doing it with Cut, but it caught on pulling out and broke.
When I exchanged for a replacement Pick and turned Screw, it was not bent more than the first one.
Chain cut and tried to pull out again.
It is durable due to poor precision.
If so high things are better.View Detail
Poor
Part accuracy and durability are badIt is typical of bad mood.
Whatever versatility is not to choose Size
Part accuracy is too bad and there is no durability.
didNon-seal (The cheapest one)
I used it to cut 525 Size.
The core is slightly bent from the beginning, it is difficult to capture the center
Furthermore, when extruding Pin, the tool side loses
The core cracked vertically, it got broken.
Although it responded with the attached spare parts,
Although it endured work,
I crooked again and I can not use it anymore.
It's almost disposable.
There is no complaint because the price is price ,,,
Conversely I was impressed with the durability of Did.
Parts pushing out the core (?) As
Small Sana Bearing has 1 pcs..
It is a part not included in Instruction Manual,
When exchanging the core, if you disassemble it inadvertently
Be careful as it will definitely lose it.
I do not know what will happen if it's gone.View Detail
Very Good
To Chainfor ReplacementI've been Cut in Grinder so far but it takes time and it is troublesome so I bought it with Chain this time. The Chain Tool that I was planning to purchase was out of stock so I made it the cheapest kore. When opening for the first time I saw it was somewhat uneasy because I was not able to see things that seemed to be of good quality in flattery even though I was worth seeing at the first time. But Chain's Cut was okay as it made it without problems.
However, is the accuracy of the core pushing out Pin poor? It is Large strange to remove from Chain after Cut. I knew that it would be okay if I used it only once a year because it was missing if it was lightly touched with a slotted screwdriver.
If you do not use it frequently in business etc. I think that it is Recommendation.View Detail
Most Viewed Reviews Of MINIMOTO Chain Cutters
Excellent
cheapIt is not a high-end product, so this is sufficient unless you use it to do everything.
If you can't seem to get the Pin out when you pull it out.
You can use it after shaving it with a grinder and it is up to you to devise a way to use it.
It is useful if you have it.View Detail
Poor
It can break immediately with the first timeThere was a set of Body and a substitute Pick.
First turn turn Screw before Chain cut and you see that Pick is bent.
Since I can not use it, I tried doing it with Cut, but it caught on pulling out and broke.
When I exchanged for a replacement Pick and turned Screw, it was not bent more than the first one.
Chain cut and tried to pull out again.
It is durable due to poor precision.
If so high things are better.View Detail
Poor
Part accuracy and durability are badIt is typical of bad mood.
Whatever versatility is not to choose Size
Part accuracy is too bad and there is no durability.
didNon-seal (The cheapest one)
I used it to cut 525 Size.
The core is slightly bent from the beginning, it is difficult to capture the center
Furthermore, when extruding Pin, the tool side loses
The core cracked vertically, it got broken.
Although it responded with the attached spare parts,
Although it endured work,
I crooked again and I can not use it anymore.
It's almost disposable.
There is no complaint because the price is price ,,,
Conversely I was impressed with the durability of Did.
Parts pushing out the core (?) As
Small Sana Bearing has 1 pcs..
It is a part not included in Instruction Manual,
When exchanging the core, if you disassemble it inadvertently
Be careful as it will definitely lose it.
I do not know what will happen if it's gone.View Detail
Very Good
To Chainfor ReplacementI've been Cut in Grinder so far but it takes time and it is troublesome so I bought it with Chain this time. The Chain Tool that I was planning to purchase was out of stock so I made it the cheapest kore. When opening for the first time I saw it was somewhat uneasy because I was not able to see things that seemed to be of good quality in flattery even though I was worth seeing at the first time. But Chain's Cut was okay as it made it without problems.
However, is the accuracy of the core pushing out Pin poor? It is Large strange to remove from Chain after Cut. I knew that it would be okay if I used it only once a year because it was missing if it was lightly touched with a slotted screwdriver.
If you do not use it frequently in business etc. I think that it is Recommendation.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING