- The OEM helmet holder position on the ninja is not good enough for the helmet to hit the footpeg, so I installed this. It is very easy to use and I wonder why it was not in this position from the begi...閱讀更多
- The OEM helmet holder position on the ninja OEM would not allow the helmet to hit the footpeg, so I added this. It is very easy to use and I wonder why I didn't put it in this position from the beginn...閱讀更多
- The side back bar was installed and the helmet holder was no longer usable, so the bracket was used to relocate the helmet holder. Fortunately, the BOLT Shoulder Bag comes with a helmet holder wire fo...閱讀更多
- This is a product to shift the position of the helmet lock on ninja250.You can't move it without unlocking it, so you don't have to worry about it being stolen, and you don't have to worry aboutI real...閱讀更多
- OEM's hard to use Helmet holder becomes usefulItems. It's a must.閱讀更多
- Ninja400 (2021 model year) The OEMHelmet lock position of the "FOOTPEG" is not good, and the Helmet touches the footpeg.We purchased this product to improve the position of the helmet lock because the...閱讀更多
- The infamous (and difficult to use) NINJA 400/200 OEM Helmet lock position was changed toItems for relocating to an easy-to-use position.Remove OEM Helmet lock from OEM Bracket orTo install it on the ...閱讀更多
- The Cruiser Type is a large half with a side bag for loading, but the OEM Helmet lock is located at the back of the side bag, making it difficult to use...I found this product on Net and bought it bec...閱讀更多
- It was interfering with my side bag and I was wondering what to do about it, but I found a good one.I asked Shop to do the installation work because I didn't have any tools, but he said the installati...閱讀更多
- The OEM's uncomplimentary Helmet lock can be relocated to a so-so location.The screw lock is very tight, so be careful not to lick it when you remove the screw for the first time. Moreover, the wrench...閱讀更多
- Installation was so easy that I didn't need an Instruction Manual!By far easier to use than the OEM position!One point, the OEM lock is held in place by a star shaped Screw, so I needed a star shaped ...閱讀更多
- The helmet holder of NORMAL is hard to use, so I replaced it with KIJIMA's bracket. If you are planning to buy a NINJA250/400, you should buy this one too.閱讀更多
- The standard Helmet lock on NINJA400 is the worst place in the world to lock a helmet and it's completely unusable as is. "Ninja" I think it's a shame for Brand.So, I bought and tried this Bracket, us...閱讀更多
- Once unlocked, the Hook drops naturally so it's easy to call.The Helmet's side of the head is not going to hit the footpeg, but if you change to the Baxter, it will.閱讀更多
- The place where the Helmet lock was originally attached was a pretty awful place to be It's hard to miss It's hard to call "Helmet hits the footpeg The triple whammy ofif you look at the ninja400Owner...閱讀更多
- People who don't care about the Helmet Wound at all in the Manufacturer shipping location I'm happy with the availability of this service, although it seems to be realistically unavailable except for ...閱讀更多
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING