- The models used are V7special850 and ST400tempter.The Right Grip with a built-in switch is Refreshing, and the Throttle pipe integrated with the Right Grip is good because the bond is peeled off and t...閱讀更多
- The Honda OEM grip heater that was installed on my ZX14R was used for 6 years, so I chose this product as a replacement.The Axel side was not so difficult to install since all I had to do was to selec...閱讀更多
- Installation was relatively easy.Wiring was also done with Relay and Wiring was done at Bhatt.However, I think that it was the most strange thing for H2 to hide the wiring so that it would not be visi...閱讀更多
- I think it functions well as a Grip heater.However, I had a hard time fitting the Left Side.Apply power for 10 minutes as instructed in the Instruction Manual, then affix and insert the Aluminum Tape....閱讀更多
- I requested a replacement due to an initial defect. I am satisfied with the service.GH-10 on Terrene 700 (130mm) It is perfect inCheck the operation and temperature rise change at each level by energi...閱讀更多
- I installed it in Z900RS CafeThe OEM Grip of the Clutch Side is removed for the time being, and this product is given up because it is too tight though it tries to insert it temporarily.I had no choic...閱讀更多
- This is the second time I've installed a Kijima grip heater. The GH10 has an integrated Throttle on the Axel side, so the work can be shortened if the winding part fits. However, the OEM grip length f...閱讀更多
- 安装:购买时测量了车把尺寸,基本实现了原装位尺寸安装,但是有个非常严重的问题,包装里有三个油门拉线卡子,全是适配日系车的拉线卡子,我的车是杜卡迪自游800,安装位置不对,是根本不能使用的,幸好安装师傅非常有经验,自己手工修改了油门卡子,完美实现了安装。另外对于网页上宣称,车未点火,加热手把不能使用的功能并没有实现,不注意的话,很容易造成电瓶亏电。
----------------------...閱讀更多 - In the winter, I've been using thick Winter Gloves and electric heat Gloves.The operation of the Lever/Throttle is vague, so when it's over 5 degrees Celsius outsideI installed a grip heater to run th...閱讀更多
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING