About quality and texture: I am happy with the quality of the sealing washer from SP Takegawa, the washer is made from aluminium and for the M12 banjo bolt that are used on the SP Takegawa oil cooler.About the feeling of use: The oil cooler was showing signs of oil leaks from both the M12 banjo bolts and after the replacement of the sealing washers and tightening them to the correct torque value there are now zero oil leaks.Products to buy together: Somemore sealing washer both from SP Takegawa and Honda would also be desirable to purchase along with these 14mm sealing washers as these are consumable items that need replacing on occasion.Difficulty of installation: The process to install takes about 5 minutes, give the mating surface a clean, fit a sealing washer on both side of the banjo fitting and tighten the banjo bolt down to 22.5N . m. Not difficult to do.Cost performance and comparison with other products: Costing is high as you are only receiving a packet of five sealing washers which works out to be $1.50 each but I am unable to locate anything cheaper at the moment.About shipping and packaging: Sea frieght was my perferred method of shipping due to the lower cost but currently unavailable due to Japan Post. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: These sealing washers are a consumable item and you need to have spares on hand when carrying out your own maintenance as they tend to leak after being re-used a few times.
View Detail
- Instock
42.96 HKD (812 日幣)
Webike Point: +8 pt
(0.42 HKD)
配送訊息
In Stock : 1 left, Ships within 24 hours.
Estimated arrival date around
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
會員評論
Reviews with image
Installed on: HONDA MSX125 (GROM)
New Custom Articles
