氣門挺桿調整扳手

About quality and texture: I am happy with the quality of tappet adjustment wrench from Kitaco. Made from steel with a durable surface coating and sized for easy handling and good access.About the feeling of use: This tool is extremely convenient for adjusting valve clearances on the Grom and is compatible with 8mm and 9mm nuts so is suitable for use on the Honda head, SP Takegawa head and Kitaco head.Products to buy together: More tooling from Kitaco would also be desirable to purchase along side the tappet adjustment wrench for maintaining the Grom.Difficulty of installation: The process to install takes only a minute and is not difficult to do once you have gained access by removing the tappet covers.Cost performance and comparison with other products: Good costing as you are getting a quality made tool that can be used on multiple types of tappet sizes and the pricing almost the best value, only to be beaten by the wrench set from MiniMoto.About shipping and packaging: Sea frieght was my perferred method of shipping due to the lower cost but currently unavailable due to Japan Post. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: If you are looking for a complete specialty tool set to work on the Grom then you may want to take a look at the MiniMoto monkey engine special tool set.

Since it was exhaust steam side and intake-air side 0.14 0.12 to a 20,000-km run, it adjusted using the article here.Using for the
SuperCUB110 is on the 9-mm side.

The touch and the result which were used are good.Although the knurl process of

, however the place which it tool
of the direction which carries out Adjuster adjustment Has is carried out, when it fastens and is crowded with a Wrench being conscious of bolting Torque 9 N-m, it slides together and adjustment shifts.

It has grip 55 to 60 kg, and just like men in general once.
Even if it grasps strongly intentionally, it has and withers.Since it is , if it loosens several times, it adjusts and a check, and time and effort and practice are required.

If it gets used, it can take out on the dot, but I think whether it is all right to buy a thing with a large place in which the above has trouble and a direction to worry.It is setting of price with a generally higher after [

] KITACO.

Since the Tappet Noise of the CUB became large and was worrisome, this tool was used for adjustment.Since it is a reliable product made from a KITACO and the product itself is made exactly, user-friendliness is satisfactory.Although it is adjustment in a somewhat narrow part, it can carry out very easily and is satisfactory.I think that it arranges and is satisfied since it is necessaries as a specialized tool although it does not adjust frequently.

It was used when building a Kit into a CUB PRESS.The completion of work is carried out satisfactorily.By the Wrench of
money on hand, although the work itself was possible, it purchased in consideration of workability, and it was a correct answer.
Since severe feeling can adjust also in the space-saving state, we recommend you.

He wanted to do tappet adjustment more comfortably and it was purchased.
It will be what although it is the used comment... It is hard to use than expected.
Although it is (he is not only used), working efficiency increases markedly rather than there is nothing.
I think that it has since it uses for adjustment of an important portion, and there is no loss.