I really didn't like the factory-installed steering wheel on my friend's Honda Solo. I suggested that he replace the steering wheel and he agreed. The choice fell on this manufacturer as it has a large selection of handlebars with clear dimensions and many good reviews. The workmanship was pleasantly surprised. Everything went well in terms of size. The new steering wheel turned out to be much more comfortable than the factory one. The appearance of the motorcycle has become much more interesting. We are satisfied!!!
View Detail
- Instock
185.98 HKD (3,520 日幣)
Webike Point: +35 pt
(1.84 HKD)
配送訊息
In Stock : 2 left, Ships within 24 hours.
Estimated arrival date around
匹配
HONDA
-
CB400SF
99-07 NC39 VTEC II* requires drilling of switch hole|* requires side cap (for 18mm ID)
-
CB400SF
99-07 NC39 VTEC III* requires drilling of switch hole|* requires side cap (for 18mm ID)
-
CB400SF
08-21 NC42 VTEC Revo *Requires switch hole drilling|*Requires side cap (for inner diameter 18mm)
-
CB400SF
-98 NC31 *Processing of switch hole required|* Required side cap (for 18mm ID)
查看全部
HONDA
YAMAHA
-
SR400
01-12 (Carb/FI Disc Brake Car) *Processing of switch hole is required
-
XJR1300
07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID)
-
XJR1300
00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID)
-
TW225E
00- (Disc Brake Car) *Processing of switch hole is required
查看全部
YAMAHA
SUZUKI
-
ST250
-07 NJ4AA Carburetor *switch hole drilling required|*Side caps can be used for stock.
-
RV200 VANVAN
-07 NH41A Carburetor *Processing to open switch holes required|* The stock side caps can be used.
-
GSR400
-12 *Ask to drill switch holes|* Normal side caps can be used.
-
GRASS TRACKER Big Boy
09-12 (FI car)*You can use stock side caps.
查看全部
SUZUKI
KAWASAKI
-
BALIUS2
*Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
-
BALIUS
91-94 *Processing of switch hole required|* Required side cap (for 18mm diameter)
-
ZEPHYRX
*Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
-
ZEPHYR750 RS
*Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
查看全部
KAWASAKI
Others
Open Fit Model Information Table
-
Universal
商品以下描述由Google自動翻譯。
商品詳情
●把手顏色：鍍鉻
●材質：鋼
●外徑：φ22.2mm
●內徑：φ18mm
●可沿用原廠離合器線和煞車油管。
●把手尺寸
．全高：80mm
．全寬：480mm
．把手固定有效寬度：115mm
．把手內移長度：125mm
．內縮角度：28度
．前頃角度：95度
*
※本商品不含照片中的把手固定座。
※尺寸表示參考水平狀態。
.
★日本製，從試作、安裝確認、量產都由HURRICANE自行一條龍管理。
★基於在東大阪多年積累的技術與經驗、精心挑選的材料、多種拋光工藝、商品編號的刻印、高精度的彎管與焊接技術、精美的表面處理、通過諸多細節而呈現此款把手。
★使用具有高抗拉強度的STKM13A鋼材，通過JMCA標準，三重鎳鉻鍍層(3層鎳+1層鉻)，足夠厚的鍍層，因此具有出色的耐久性與抗腐蝕性。
警告
* 如果商品有附上說明書，說明內容有可能是日文的。
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
會員評論
Reviews with image
Fits:KAWASAKI 250TR -06 *Requires switch hole drilling|* Requires changing the orientation of the brake banjo and throttle holder., HONDA NC700S 12 (except for ABS and DCT cars) *Processing of switch hole is required|* Required side cap (for 18mm diameter), HONDA HORNET250 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter), KAWASAKI W400 *Switch hole drilling required|*The direction of the brake banjo needs to be changed. To change the direction, you need to remove the brake hose.
Installed on: HONDA SOLO
Fits:KAWASAKI 250TR -06 *Requires switch hole drilling|* Requires changing the orientation of the brake banjo and throttle holder., HONDA NC700S 12 (except for ABS and DCT cars) *Processing of switch hole is required|* Required side cap (for 18mm diameter), HONDA HORNET250 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter), KAWASAKI W400 *Switch hole drilling required|*The direction of the brake banjo needs to be changed. To change the direction, you need to remove the brake hose.
May 29, 2020
To replace the SR500 OEMLow Handlebar
I bought it to put a Bar end mirror on my SR500
The OEMHandlebar can't be fitted with a bar end because the end is welded shut
I chose this product to make the Handlebar as close to the OEM shape as possible
It is not the Up type of Initial Model, but Low type
It's 10mm longer in width than the OEM, but it's not uncomfortable
The height, pull and droop are the same positional feel as the OEM Low Handlebar
If it is not to attach Bar End, there is no need to replace it
Cables are fine as they are NORMAL
My impressions of its use are still about 200km, but I don't have any problems with it
The motorcycle has always had a lot of vibrations, but switching to a different motorcycle may have made the vibrations even stronger
It's not like my hands are getting tired easily
I'm not saying that the change has made anything better, or that it has made anything better
It's the same as it was with the OEMs
As for the quality, it looks good at the moment
I don't know the long term durability of Rust's stickiness etc
This is a recommendation for those who want to maintain the OEM look and add a Bar End
Helpful?
Fits:YAMAHA XJR1300 07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID), YAMAHA XJR400R 01-07 RH02J *Processing to open switch hole required|*Side cap required (for 18mm diameter), YAMAHA XJR1300 00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID), YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required, YAMAHA SR400 88-00 (CV carburetor) *Processing to drill switch holes is required
Jan 30, 2022
Just as I imagined, with a lower Handle position!
I put it on my st250, but the OEM handlebar made me look awkward when riding.
The quality is not luxurious, but it feels solid!
Helpful?
Fits:YAMAHA XJR1300 07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID), YAMAHA XJR400R 01-07 RH02J *Processing to open switch hole required|*Side cap required (for 18mm diameter), YAMAHA XJR1300 00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID), YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required, YAMAHA SR400 88-00 (CV carburetor) *Processing to drill switch holes is required
Apr 24, 2019
Low-eyed, narrow-eyed and Steel
Purchased along with the X11's Pipe Handlebar
I didn't want to change the Position, even though it is made into a bar handle, so I had to take a few steps exactly Choose a Handlebar that measures and reproduces as much of the NORMAL position as possible I did
Position is perfect
And the main reason why we chose this is because of Steel It's not only the strength of the material, but it's also the material itself, so you don't need to add any weight It can reduce microvibrations to some extent
Helpful?
Fits:YAMAHA XJR1300 07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID), YAMAHA XJR400R 01-07 RH02J *Processing to open switch hole required|*Side cap required (for 18mm diameter), YAMAHA XJR1300 00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID), YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required, YAMAHA SR400 88-00 (CV carburetor) *Processing to drill switch holes is required
May 29, 2013
It attached to ninja400r.Since it is satisfactory as
goods although
drilling process which is inclining forward very much was a little troublesome if compared pure, it is the star 5.
Helpful?
New Custom Articles
