無土除套件

Fit perfectly on SX ninja 24' model and look much better the installation may take some time but it is worth itvery recommended!!

I looked at the price and bought it because it was cheaper than the Puch and it would pass inspection (some people say it won't pass because the Number standards have changed …). The installation process was easy to understand because the Instruction Manual was enclosed. (I might introduce it on myGarage too.) When I tried to install the H2sx OEM blinker, it was not possible to install the Pannier case, so I bought the Active blinker and installed it including the press-up which took a little time. If you want to use it with Pannier case, I think you have to spend a little bit of money or DIY. However, I am glad I installed it because the Rear Fender area is very refreshing!

I don't think of attaching the Pannier case to this product at all, because the Pannier case and Blinker hits the gut! So the Pannier case is now covered in scratches
I took a 1.5 cm collar and shifted it backwards to make a hole in the License Plate Light with Drill and put Number on it
I managed to install the License Plate Light with a bracket, but I was able to do it hELLIP;
It took a lot of work to get it into shape here
Active, why didn't you consider the Pannier case ( ; ;)

Instructions in Japanese only, but the pics were enough to get by. Probably easier since I already fitted an R&G Tail Tidy that was s shocker in terms of leaving all of the wiring exposed and vibrated uncontrollably due to the single flat plate design. Don’t get an R&G for your H2 SX or SX SE!! The Active eliminator is so so much better. And has a proper plug for the number plate light...shame I cut mine off to fit the R&G eliminator!!! This product fits well, looks great and doesn’t vibrate!!!

I fitted an R&G eliminator that cost me over $200 and although it fitted ok, it was essentially just a set of two flat plates that had no cover for electricals. So I had to tape up all of the wiring and was very untidy. The worst was yet to come as the flat plates vibrated terribly. Never happy with the set up!! So I decided to try the Active Tail Tidy. Besides getting instructions in only Japanese, the pictures helped a little and the kit fitted really well and it protects and neatly hides all of wiring, (that took me over 30min to strip off the special waterproof tape I used for the R&G kit). Additionally, the R&G kit had different connectors so I had to cut off the bikes original tail light connector, and guess what... the Active kit had the correct connector!!! So it was a shame that I cut off the original as now I’ve got shitty connectors to fit a great kit. I found that the panniers are now touching the indicators, but I’m going to have a go at bending the side plates slightly forward that should fix this issue easily enough. Stay away from an R$G and get an Active kit !!!